- Terminal arrangement - Horizontal
- Application - Semi - automatic / Full - automatic terminal crimping machine
- Stroke - 30mm
- Weight - 4,4 kg
-
-
- Terminal arrangement - Vertical
- Application - Semi - automatic / Full - automatic terminal crimping machine
- Stroke - 30mm
- Weight - 4,4 kg
-
- Wire size: 0,1 - 2,5mm² (AWG12-36) (special size could be ordered)
- Pre-feeding device: servo motor (it is optional)
- Capacity: 4000 - 4200 pcs/hour (the length of each piece is less than 100mm)
- Function: double ends for wire striping and crimping, single end for semi stripping, single end for crimping.
- The adjusting method for blade: microprocessor controlled system + high precision stepping motor driving.
- Cutting length: 35 - 100000 mm (special length could be order)
- Cutting precision: adjusting range 0,5mm + cutting length * 0,5% below
- Stripping length: 1-10mm (special length could be ordered)
- Equipped die: OTP horizontal die, straight die, European style die, Korean die and etc.
- Crimping machine: frequency conversion mute crimping machine
- Control: PLC, touching screen.
- Inspecting items: inspection for wire tangle, defective wire, pre-feeding, wire crimping, and air pressure.
- Power supply: AC 230V/110V 50/60Hz
- Compressed air: 0,5 MPa about 140 N/min
- Outer dimension: 700 x 800 x1500 mm
- Weight: about 300kg
-
- Cable Type - 0,3 - 6 mm² (AWG9 # - AWG23 #), other sizes on request,
- Features - wire cutting, wire stripping, half stripping, one and two-sided crimping,
- Dimensions - 3500 x 1200 x 1700mm,
- Weight -1100 kg.
-
Cross section: 0,3 - 5 mm² (Other size can be special ordered) Cutting length: 60-10000mm (Other size can be special ordered) Cutting precision: ±(0.2%*L+1)mm Stripping length: 0,1 - 18 mm Feeding speed: Max. 8,0 m/s Wire collecting conveyor: 2 m, 4 m (Other size can be special ordered) Crimping force: 30 kN Power: 220V 50Hz Air supply: 0,5 MPa - 0,7 MPa, 8m³/h Weight: 1100kg Dimension: 3500 x 1200 x 1700 mm Detecting ability: wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and seal detecting. Applicator range: stroke is 30 and 40 mm . -
- Wire range 0,3-6 mm²(AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60-10000mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0.1-18mm
- Feeding speed Max. 8m/s
- Crimping force 30kN
- Power 220V 50HZ
- Air supply 0,5 MPa - 0,7 MPa，8 m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire , terminal crimping lacking and soldering temperature;
- Applicator range OTP applicator, European applicator and pneumatic applicator; It can be installed with CFM. monitoring the crimping quality during the whole processing and 100% traceability.
- Function automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, one end twisting and tinning, another end terminal crimping and seal inserting;
-
- Cross range AWG22#-AWG28#
- Max. wire pin 20P
- Max. wire width 28 mm
- Single wire width 0,8 - 2,5 mm
- Cutting length 72 - 9999 mm
- Cutting precision ±0,5 mm
- Stripping length 2 - 10 mm
- Crimping force 20 kN
- Capacity 18000PCS/H (20P ribbon cable)
- Power 230V, 50 Hz
- Motor 0,75 kW
- Air supply 0,4 - 0,6 MPa, filtered and dry air
- Weight about 585 kg
- Dimension 1580 x 1345 x 2000 mm
- Function - single end crimping, double ends crimping, interval crimping, positive and negative crimping
-
- Wire range 0,3 - 6 mm² (AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60 - 10000 mm (Other size can be special ordered）
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1 - 18 mm
- Feeding speed Max. 8,0 m/s
- Crimping force 30 kN
- Power 230V 50Hz
- Air supply 0,5 MPa - 0,7 MPa，8m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and terminal crimping lacking;
- Applicator range OTP applicator, European applicator and pneumatic applicator;
- It can be installed with CFM, monitoring the crimping quality during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, single end heat shrink tubing/jacketing inserting.
-
- Wire range - 10-120mm²
- Crimping force - 200KN
- Diameter. Max 38mm
- Crimping width - 12,5mm (Can be special ordered )
- Weight - 160kg
- Dimension - 700 × 860 × 1260 mm
- Power = 220 V, 50Hz
- Motor - 2300 W
-
- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
-
- Crimping force: 15KN
- Capacity : 250 pcs / min
- Average electric consumption rate : 0.35KW
- Motor : 0.55KW
- Voltage : AC220V , 50Hz
- Stroke : 23mm
- Air supply : 0.5 Mpa-0.7 Mpa
- Dimension: 300 x 350 x 580mm
- Weight : 50kg
- Copper belt size : 2mm/4mm/6mm
- Feeding mode : By mechanical feeding
- Application : Connection between neon lamp and resistance, connection among wires, connection between slide switch and wire, and connection among thermal sensors such as magnetic reed switch and temperature fuse.
-
- Terminal arrangement - Vertical
- Applicable mechine type - semi-automatic / full automatic terminal crimping machine
- Stroke - 40 mm
- Weight - 6,3 kg
-
De BZW-RK20 kabelrecyclingmachine is bedoeld voor het terugwinnen van metalen uit kabels, voornamelijk koper. Dankzij de mogelijkheid om een breed scala aan kabelmaten aan te kunnen, is het apparaat zeer veelzijdig. Daarnaast kenmerkt het zich door een hoge efficiëntie. -
- tying belt length - 75-140 mm
- tying diameter - 5-30 mm
- winding outer diameter - 50-200 mm
- winding distance - 100-200 mm
- tying speed - 0,6 time/second
- winding speed - 1-10 laps/second tying belt - encapsulated iron core
- power - AC 220 V, 60 Hz
- rate power - <200 W
- weight - 40KG
- dimension - 500 x 300 x 400 mm
-
- Stripping diameter - ø0,75 mm² to ø95 mm²,
- Functions - wire stripping,
- Dimension - 350 x 300 x 400mm
- Weight - 20 kg.
-
1. BZW-20TS kan verschillende soorten applicators veranderen afhankelijk van verschillende producten. 2. Geavanceerde servomotor en PLC-besturingssysteem. 3. Krachtmonitoring wordt gebruikt. 4. Geavanceerde industriële computer, PLC en krimpkrafsysteem, gegevens kunnen worden opgeslagen en gecontroleerd. 5. Gegevensopslag voor verschillende parameters, die een continue sequentiële krimpfunctie mogelijk maken. 6. Stabiele werking, grote krimpkrafforce, overbelastingsbeveiliging. 7. Applicators gemaakt van geïmporteerd applicatorstaal, lange levensduur. -
- Crimping force - Max.40kN
- Rated power - Max.2,0kW
- Power - 220 V, 50Hz
- Dimension - 1050 x 600 x 1500 mm
- Weight - 120KG
- Stoke - 30 mm, 40 mm common use
- Applied applicator - OTP applicator, pneumatic applicator, European applicator
-
De BZW-9A ultrasone lasmachine is een apparaat dat speciaal is ontworpen voor het verbinden van koperdraden met behulp van geavanceerde ultrasone technologie. De apparatuur integreert de nieuwste ontdekkingen op het gebied van akoestiek, mechanica en polymeerwetenschap om ongeëvenaarde prestaties en betrouwbaarheid te bieden in draadverbindingstoepassingen. -
- Measurement range - 0 - 5000N
- Functions - Measurement of breaking force, aging
- Dimensions - 410 x 260 x 1000 mm
- Weight - 75 kg
-
Mostly used for terminal crimping of aviation plug. Crimping on the four edges of terminal to make better contact between conductor wire and terminal. Exquisite in structure design, evenness crimping force and excellent finished shape of terminal crimping .- Wire diameter range - 0.05-10mm2
- Shut height - 135.8mm
- Stroke 40mm
- Applicable machine type - Semi-automatic terminal crimping machine
- Dimension 185 x 165 x 160 mm
- Weight 8kg
