- Wire range: 0,1-2 mm2 (AWG27#-AWG14#) (Other size can be specially ordered)
- Stripping length: 1-15 mm
- Stripping type：Pneumatic
- Crimping force: 20 kN
- Air supply：0.3~0.4 Pa
- Rated power: 0,75 kW
- Average power: 0,45 kW
- Power: 220V/50Hz
- Dimension: 500 x 350 x 730 mm
- Weight: 70 kg
- Stroke: 30 mm (40 mm is optional)
- Functions: stripping and terminal crimping, especially for cable core, hairline，multi-layers shielded wire and network wire.
-
-
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
-
- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
-
- Wire range: 10-120 mm² (AWG6#-AWG0000#),
- Crimping force: 160 kN,
- Rated power: 7,5 kW,
- Average power:3,5 kW
- Power: 380 V / 50 Hz, three phase
- Dimension: 900 x 1000 x 2000 mm
- Weight: 900 kg
- Stroke: 40 mm (50 mm is optional)
-
- Wire range 0,1 - 2,5 mm² (AWG23-AWG13) (Other size can be special ordered）
- Cutting length 35 mm~100000 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Twisting length 4 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6,0 m/s
- Capacity 4500 - 5000 pcs/h (within length 100mm)
- Crimping force 20 kN
- Voltage 230V 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa - 0,7 MPa，6m³/h
- Weight 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping, single end twisting
- Detecting ability wire knotting, wire lacking, terminal lacking and air pressure detecting
- Applicator range Stroke 30 mm (40 mm stoke can be special ordered)
-
- Cutting length 45-600 mm（length can be specified）
- A- end stripping length：0 -5 mm
- B- end stripping length：0-10 mm
- Twisting length 3-8 mm
- Wire type AWG28#-18#flat wire and electronic wire
- Max. wire width 28mm
- Max. wire pin 24P
- Capacity 10000PCS／H(12P flat wire)
- Air supply 0,4 MPa - 0,6 MPa
- Power 220V, 50Hz
- Weight about 500kg
- Dimension 940 x 1100 x 1850 mm
- Function A-end terminal interval crimping, B-end wire twisting and tinning;
- Cutting length 45-600 mm（length can be specified）
-
- Wire range 0,3 - 2,5mm² (AWG13-AWG23) (Other size can be special ordered）
- Cutting length 35 mm~6500 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6.0 m/s
- Capacity 5000 - 5500 pcs/h (within length 100mm)
- Crimping force 20kN
- Voltage 230V, 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa-0,7 MPa，6m³/h
- Weight about 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping
-
- Wire range 0,3 - 6 mm² (AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60 - 10000 mm (Other size can be special ordered）
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1 - 18 mm
- Feeding speed Max. 8,0 m/s
- Crimping force 30 kN
- Power 230V 50Hz
- Air supply 0,5 MPa - 0,7 MPa，8m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and terminal crimping lacking;
- Applicator range OTP applicator, European applicator and pneumatic applicator;
- It can be installed with CFM, monitoring the crimping quality during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, single end heat shrink tubing/jacketing inserting.
-
Cross section: 0,3 – 5 mm² (Other size can be special ordered) Cutting length: 60-10000mm (Other size can be special ordered) Cutting precision: ±(0.2%*L+1)mm Stripping length: 0,1 – 18 mm Feeding speed: Max. 8,0 m/s Wire collecting conveyor: 2 m, 4 m (Other size can be special ordered) Crimping force: 30 kN Power: 220V 50Hz Air supply: 0,5 MPa – 0,7 MPa, 8m³/h Weight: 1100kg Dimension: 3500 x 1200 x 1700 mm Detecting ability: wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and seal detecting. Applicator range: stroke is 30 and 40 mm . -
- Wire range 0,3-6 mm²(AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60-10000mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0.1-18mm
- Feeding speed Max. 8m/s
- Crimping force 30kN
- Power 220V 50HZ
- Air supply 0,5 MPa - 0,7 MPa，8 m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire , terminal crimping lacking and soldering temperature;
- Applicator range OTP applicator, European applicator and pneumatic applicator; It can be installed with CFM. monitoring the crimping quality during the whole processing and 100% traceability.
- Function automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, one end twisting and tinning, another end terminal crimping and seal inserting;
-
- Cross range AWG22#-AWG28#
- Max. wire pin 20P
- Max. wire width 28 mm
- Single wire width 0,8 - 2,5 mm
- Cutting length 72 - 9999 mm
- Cutting precision ±0,5 mm
- Stripping length 2 - 10 mm
- Crimping force 20 kN
- Capacity 18000PCS/H (20P ribbon cable)
- Power 230V, 50 Hz
- Motor 0,75 kW
- Air supply 0,4 - 0,6 MPa, filtered and dry air
- Weight about 585 kg
- Dimension 1580 x 1345 x 2000 mm
- Function - single end crimping, double ends crimping, interval crimping, positive and negative crimping
-
- Cable Type – 0,3 – 6 mm² (AWG9 # – AWG23 #), other sizes on request,
- Features – wire cutting, wire stripping, half stripping, one and two-sided crimping,
- Dimensions – 3500 x 1200 x 1700mm,
- Weight -1100 kg.
-
- Wire size: 0,1 - 2,5mm² (AWG12-36) (special size could be ordered)
- Pre-feeding device: servo motor (it is optional)
- Capacity: 4000 - 4200 pcs/hour (the length of each piece is less than 100mm)
- Function: double ends for wire striping and crimping, single end for semi stripping, single end for crimping.
- The adjusting method for blade: microprocessor controlled system + high precision stepping motor driving.
- Cutting length: 35 - 100000 mm (special length could be order)
- Cutting precision: adjusting range 0,5mm + cutting length * 0,5% below
- Stripping length: 1-10mm (special length could be ordered)
- Equipped die: OTP horizontal die, straight die, European style die, Korean die and etc.
- Crimping machine: frequency conversion mute crimping machine
- Control: PLC, touching screen.
- Inspecting items: inspection for wire tangle, defective wire, pre-feeding, wire crimping, and air pressure.
- Power supply: AC 230V/110V 50/60Hz
- Compressed air: 0,5 MPa about 140 N/min
- Outer dimension: 700 x 800 x1500 mm
- Weight: about 300kg
-
- Materiál - Vysoce uhlíková ocel
- Použití - Poloautomatizované zařízení pro zacvakávání terminálů
- Suw - 30mm
- Váha - 4,4 kg
-
- Measure range - 0-1000N
- Measure mode - Manual
- Testing speed - 30~300 mm/min
- Stroke - 570mm
- Counting function - 9999 cycle
- Voltage - AC 220V
- Weight - 40 kg
- Dimension :360 x 255 x 1000 mm
-
- Feeding mode - horizontal
- Shut height - 135,78 mm
- Feeding - Max. 40 mm
- Terminal thickness Max. 1,2 mm
- Applicable wire diameter 0,08-6 mm2 (9-30AWG)
- Feeding structure pneumatic
- Weight 6 kg
- Dimension 180 x 155 x 110 mm
- Stroke 40/30 mm
- Application Semi-automatic / Full automatic terminal crimping machine
-
- Crimping force - 40 kN
- Features - crimping machine for Junction box,
- Dimensions - 1050 x 610 x 1500mm,
- Weight - 120 kg,
-
- Suitable for different wire diameter.
- Suitable for different model of PV junction box.
- Applicable machine type : BZW-4T-C Mute terminal crimping machine
- Shut height : 125mm
- Stroke : 30-40mm
- Weight :10kg
- Dimension : 130 x 130 x 150mm
-
- Wire diameter range - 0.05-10mm2
- Shut height - 135.8mm
- Stroke 40mm
- Applicable machine type - Semi-automatic terminal crimping machine
- Dimension 185 x 165 x 160 mm
- Weight 8kg
-
Toto zařízení může provádět funkce skórování vysokonapěťových vodičů, odstraňování hliníkové fólie, stříhání stínící sítě a odstranění vnitřní izolace současně; každá z funkcí může být používána nezávisle. Funkce BZW-G5001:- odstranění izolace z vodiče,
- odstranění fólie,
- stříhání stínící sítě,
- odstranění vnitřní izolace,
- obrácení stínící sítě.
-
BZW-F4+G je moderní stroj pro stiskování terminálů značky Harting, který nabízí stabilní provoz a snadnou obsluhu. Díky své kompaktní konstrukci a pokročilým funkcím je ideálním řešením pro výrobce hledající efektivní nástroj pro stiskávání terminálů typu Harting. BZW-F4+G disponuje funkcemi odstranění izolace, ovinování, navlékání a stisknutí, co výrazně zvyšuje výrobní výkon.
