-
40 kN terminal crimping press. Cable processing machines. -
- Stripping capacity and specification 1-10 pieces/ time, AWG#18-#32
- Air pressure 4- 7,5kg
- Weight 15kg
- Min. cutting length 2,5mm
- Stripping and stripping length 2,5 - 25 mm
- Power 90 W
- Max. cutting length 25 mm
- Stripping capacity 120-30 times/minute, adjustable
- Power supply 220V/ 50Hz
- Stripping range 0,1 - 0,75 mm2
- Outer dimension 320 x 230 x 300 mm
-
- Stripping range : 0,1 - 2,5mm²(AWG13#-AWG28#)
- Applied wire type: computer core wire, shielding wire, telephone wire, flat wire, etc.
- Stripping length : 20mm
- Stroke: 20mm
- Air supply: 0,5MPa - 0,7 Mpa
- Weight : 9,5 kg
- Voltage: AC110V/220V 50/60Hz
- Dimension : 260 x 150 x 270 mm
-
- Stripping diameter - max. ø15 mm,
- Functions - wire stripping,
- Dimension - 480 x 330 x 280mm
- Weight - 45 kg.
-
- Wire range 0,3 - 6 mm² (AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60 - 10000 mm (Other size can be special ordered）
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1 - 18 mm
- Feeding speed Max. 8,0 m/s
- Crimping force 30 kN
- Power 230V 50Hz
- Air supply 0,5 MPa - 0,7 MPa，8m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and terminal crimping lacking;
- Applicator range OTP applicator, European applicator and pneumatic applicator;
- It can be installed with CFM, monitoring the crimping quality during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, single end heat shrink tubing/jacketing inserting.
-
- Wire range - 4-6mm² (Other size can be special ordered）
- Cutting length - 60-99999mm (Other size can be special ordered）
- Cutting precision - ±（0.2%*L+1）mm
- Stripping length - 0,1-18,5mm
- Feeding speed - Max. 8,0 m/s
- Crimping force - 30kN
- Voltage - 220V, 50HZ
- Air supply - 0,5 MPa-0,7 MPa，8m³/h
- Weight - 1100kg
- Dimension - 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, air pressure, bare wire and lack of terminal crimping detecting;
- Applicator range - OTP applicator, European applicator and pneumatic applicator
- It can be equipped with pressure monitoring system, monitoring the pressure during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping(it is optional)
-
- Wire range 0,3-6 mm²(AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60-10000mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0.1-18mm
- Feeding speed Max. 8m/s
- Crimping force 30kN
- Power 220V 50HZ
- Air supply 0,5 MPa - 0,7 MPa，8 m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire , terminal crimping lacking and soldering temperature;
- Applicator range OTP applicator, European applicator and pneumatic applicator; It can be installed with CFM. monitoring the crimping quality during the whole processing and 100% traceability.
- Function automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, one end twisting and tinning, another end terminal crimping and seal inserting;
-
BZW-3.0 C C PM 4M is upgrade of automatic high precise double ends terminal crimping machine. Mainly for power, automotive, new energy industry wire hamess preocessing. BZW-3.0 C C PM 4M can realize long wire cuttin, wire stripping, marking, waterproof seal inserting and double ends terminal crimping at the same time. -
Cross section: 0,3 - 5 mm² (Other size can be special ordered) Cutting length: 60-10000mm (Other size can be special ordered) Cutting precision: ±(0.2%*L+1)mm Stripping length: 0,1 - 18 mm Feeding speed: Max. 8,0 m/s Wire collecting conveyor: 2 m, 4 m (Other size can be special ordered) Crimping force: 30 kN Power: 220V 50Hz Air supply: 0,5 MPa - 0,7 MPa, 8m³/h Weight: 1100kg Dimension: 3500 x 1200 x 1700 mm Detecting ability: wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and seal detecting. Applicator range: stroke is 30 and 40 mm . -
- Cable Type - 0,3 - 6 mm² (AWG9 # - AWG23 #), other sizes on request,
- Features - wire cutting, wire stripping, half stripping, one and two-sided crimping,
- Dimensions - 3500 x 1200 x 1700mm,
- Weight -1100 kg.
-
- Wire range: 2.5 - 70mm
- Combing length: 150 mm (other size can be special ordered)
- Weight: 42 kg
- Dimension: 530 x 320 x 290mm
- Voltage: 220V/50Hz
- Power: 240W
- Speed: 3 s/pcs (adjustable)
-
- Cutting length 45-600mm（length can be specified）
- A- end stripping length：0 -5mm
- B- end stripping length：0-10mm
- Twisting length 3-8mm
- Wire type AWG28#-18#flat wire and electronic wire
- Max. wire width 28mm
- Max. wire pin 24P
- Capacity 10000PCS／H(12P flat wire)
- Air supply 0,4MPa-0,6MPa
- Power 220V 50Hz
- Weight about 500KG
- Dimension 940x1100x1850mm
- Function A-end terminal interval crimping, B-end wire twisting and tinning;
- Cutting length 45-600mm（length can be specified）
-
- Cross range AWG22#-AWG28#
- Max. wire pin 20P
- Max. wire width 28 mm
- Single wire width 0,8 - 2,5 mm
- Cutting length 72 - 9999 mm
- Cutting precision ±0,5 mm
- Stripping length 2 - 10 mm
- Crimping force 20 kN
- Capacity 18000PCS/H (20P ribbon cable)
- Power 230V, 50 Hz
- Motor 0,75 kW
- Air supply 0,4 - 0,6 MPa, filtered and dry air
- Weight about 585 kg
- Dimension 1580 x 1345 x 2000 mm
- Function - single end crimping, double ends crimping, interval crimping, positive and negative crimping
-
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
-
- Wire range: 0,1-2 mm2 (AWG27#-AWG14#) (Other size can be specially ordered)
- Stripping length: 1-15 mm
- Stripping type：Pneumatic
- Crimping force: 20 kN
- Air supply：0.3~0.4 Pa
- Rated power: 0,75 kW
- Average power: 0,45 kW
- Power: 220V/50Hz
- Dimension: 500 x 350 x 730 mm
- Weight: 70 kg
- Stroke: 30 mm (40 mm is optional)
- Functions: stripping and terminal crimping, especially for cable core, hairline，multi-layers shielded wire and network wire.
-
- Specification: 270 x 260 x 640 mm
- Crimping force: 20kn
- Weight: 54kg
- Average power consumption: 0,45kw
- 5.Motor power: 0,75 kW
- Power: 220v 50Hz
- Stroke: 30mm (40mm could be ordered)
-
- Outer dimension: 420 x 580 x 320 mm
- Weight: 35 kg
- Display: 128 x 80 Blue LCD in Chinese
- Power supply: AC215-235V ≦50/Hz
- Power: 120 - 250 W
- Cutting length: 1mm-99999,9mm
- Middle stripping: 13 stripping positions in the middle.
- Stripping length: Stripping head: 0,1 - 30mm, stripping end: 0,1 - 30mm
- Applicable wire core area: 0.1-2.0mm2 *2 (AWG11#-28#) x2
- Cutting tolerance: 0,002 x L mm (within) x L= cutting length
- Twisting range: AWG11#-28# (double line)
- Twisting length: 0-30mm
- Max. Guide bushing diameter: 1,5-5mm
- Blade materials: imported high speed steel, tungsten steel
- Drive: 4 Wheels driving
- Stripping capacity per hour: 4000-10000 pieces
- Wire pressure adjustment: have
- Pulse equivalent: no error within 1 m.
- Program: it can storage 200 programs; it doesn’t need to reset parameters while changing the different wire.
- Total: 999999 pieces
- Batch: 99999 pieces
- Blade motor precision: 0,03mm
- Precision for inlet and outlet motor: mute mixed stepping motor, each step is about 0,1mm
- Remarked function: automatic pre-feeding and discharging, time sets for automatic starting, exclusive striping and discharging the wire. The program 96 is for processing the super short wire.
- The shortest twisting function: the wire could be twisted while the middle part of the wire skin length remains 26mm.
-
1. BZW-20TS Servo large terminal crimping machine can change different types of applicators according to different products. 2. Advanced servo motor and PLC control system. 3. Crimping force monitor is used to check if wire crimped qualified; crimping force exceed setting value, machine alarm and stop, and pop up crimping force anomaly window. 4.High-tech industrial computer, PLC and crimping force system , data can be stored and checked. 5.Data storage for different parameters, which allows continuous sequential crimping function. 6. Stable working, large crimping force, overload protection. 7. Applicators made of imported applicator steel, long durability. Note: user should upload data by themselves if connect with MES and server. -
- Cutting diameter - 1-200 mm
- Features - Cutting of cable tubes
- Dimension - 350 x 250 x 320 mm
- Weight - 65 kg
-
- Crimping force - 25kN
- Rated power - 0,75kW
- Average consumption - 0,45kW
- Power - 220V/50Hz
- Dimension - 360 x 550 x 680 mm
- Weight - 98 kg
- Stroke - 30 mm/40 mm
-
- Crimping force - Max.40kN
- Rated power - Max.2,0kW
- Power - 220 V, 50Hz
- Dimension - 1050 x 600 x 1500 mm
- Weight - 120KG
- Stoke - 30 mm, 40 mm common use
- Applied applicator - OTP applicator, pneumatic applicator, European applicator
-
BZW-2.0X machine has the function of wire cutting, stripping and terminal crimping. PLC control system. Exquision appearance and compact structure, space saving and artistic appearance. Simple and quick replacement of the spare parts, full digital troubleshooting, and easy to maintenance.
