-
Applicable tube diameter - ø1 - ø100 mm Applicable tube type - heat-shrink tube, ribbon cable, shielding wire, etc; It can add hot-melt cutter to process the color ribbon belt and nylon braid. Cutting length - 2 mm - 10000 mm Cutting width - 1-100 mm Cutting tolerance - 0,02 x L, ±0.2 mm Capacity - 10800 PCS/H (Depending on tube material ) Speed adjustment - 00-99 Cutter material - Tungsten steel Voltage - AC220V/50Hz Power - 170W Dimension - 350 x 250 x 320 mm Weight - 23kg -
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6Mpa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43KG
-
- Max. Processing wire diameter - 6,99mm
- Min. processing wire diameter - 0,81mm
- Cutting depth - 0,01mm
- Max. stripping length - 48mm
- Max. stripping layers - 9 layers
- Drive Model - motor/ball screw driving
- Displaying - touching screen
- Blade materials - 2 pieces, imported tungsten steel.
- Clamping device automatic centralized, motor driving, clamping force control
- Capacity - 500 - 700 pcs/h (it depends on the type and length of the cable)
- Machine starting method - manual/sensitive
- Power supply - 220V, 50Hz
- Power - 380W
- Weight - 19kg
- Outer dimension - 190 x 285 x 530 mm
- Working environment - 50℃, Medium drying workshop, without vibrating working table
-
- Power - AC 220V, 50/60Hz Single phase
- Function - Wire cutting、single end strip、double end strip、single end half strip、double end half strip、single end twisting、single end crimping，single end tinning
- Cutting length - 30mm-99999.9mm
- Stripping length - Wire head：0,1mm-7mm
- Twisting length - 3mm - 7mm
- Tube diameter - ɸ 1.5mm-5mm
- Cross section - AWG#16-AWG#32
- Crimping force - 2.0T
- Working speed - 4000-5000pcs/hour
- Crimping position - Digital adjustment
- Detection device - Low air pressure、wire lack or not、punch unwell、Wire knotting
- Tool material - tungsten steel/ high speed steel
- Dimension - 900mm*600mm*1400mm（Excluding raised part）
- Weight - 250kg
-
- Crimping force: 15KN
- Capacity : 250 pcs / min
- Average electric consumption rate : 0.35KW
- Motor : 0.55KW
- Voltage : AC220V , 50Hz
- Stroke : 23mm
- Air supply : 0.5 Mpa-0.7 Mpa
- Dimension: 300 x 350 x 580mm
- Weight : 50kg
- Copper belt size : 2mm/4mm/6mm
- Feeding mode : By mechanical feeding
- Application : Connection between neon lamp and resistance, connection among wires, connection between slide switch and wire, and connection among thermal sensors such as magnetic reed switch and temperature fuse.
-
- Crimping range 0.5 - 2.5mm2 (AWG 20-14)
- Crimping length 6/8/10mm
- Power supply 230V/50Hz/60V
- Air pressure 5 bar
- Cycle time approx 1.0 second
- Dimension 400 x 340 x 450 mm
- Weight 32 kg
-
- Wire range: 0,1-2 mm2 (AWG27#-AWG14#) (Other size can be specially ordered)
- Stripping length: 1-15 mm
- Stripping type：Pneumatic
- Crimping force: 20 kN
- Air supply：0.3~0.4 Pa
- Rated power: 0,75 kW
- Average power: 0,45 kW
- Power: 220V/50Hz
- Dimension: 500 x 350 x 730 mm
- Weight: 70 kg
- Stroke: 30 mm (40 mm is optional)
- Functions: stripping and terminal crimping, especially for cable core, hairline，multi-layers shielded wire and network wire.
-
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
-
- Wire range: 10-120 mm² (AWG6#-AWG0000#),
- Crimping force: 160 kN,
- Rated power: 7,5 kW,
- Average power:3,5 kW
- Power: 380 V / 50 Hz, three phase
- Dimension: 900 x 1000 x 2000 mm
- Weight: 900 kg
- Stroke: 40 mm (50 mm is optional)
-
- Specification: 270 x 260 x 640 mm
- Crimping force: 20kn
- Weight: 54kg
- Average power consumption: 0,45kw
- 5.Motor power: 0,75 kW
- Power: 220v 50Hz
- Stroke: 30mm (40mm could be ordered)
-
- Crimping force 60KN
- Rated power 1,5KW
- Average power 0,55KW
- Power 220V/50Hz
- Dimension 400 x 320 x 800mm
- Weight 105KG
- Stroke 30mm (40mm is optional)
-
- Specification - 310 x 270 x 710 mm
- Crimping force - 40 kN
- Weight- 58 kg
- Average power consumption - 0,85kw
- Motor power - 1,5 kw
- Power - 220v 50Hz
- Stroke - 30mm (40mm could be ordered)
-
- Crimping width - 7mm (Can be special ordered)
- Crimping terminal size - ≤2.5mm²
- Dimension - 360*550*680mm
- Weight - 106kg
-
- Crimping force - 25kN
- Rated power - 0,75kW
- Average consumption - 0,45kW
- Power - 220V/50Hz
- Dimension - 360 x 550 x 680 mm
- Weight - 98 kg
- Stroke - 30 mm/40 mm
-
- Crimping range - needle terminal: 0,5~16mm²(AWG20#-AWG5#)，pre-insulation/bare terminal: 0,1-10mm²(AWG28#-AWG7#)
- Crimping force - 15 kN
- Air supply - 0,5~0,7 MPa
- Dimension - 260 x 120 x 140 mm
- Weight - 4 kg
- Function - pneumatic crimping without any electricity.
-
- Crimping force - Max.40kN
- Rated power - Max.2,0kW
- Power - 220 V, 50Hz
- Dimension - 1050 x 600 x 1500 mm
- Weight - 120KG
- Stoke - 30 mm, 40 mm common use
- Applied applicator - OTP applicator, pneumatic applicator, European applicator
-
- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
-
- Wire range - 10-120mm²
- Crimping force - 200KN
- Diameter. Max 38mm
- Crimping width - 12,5mm (Can be special ordered )
- Weight - 160kg
- Dimension - 700 × 860 × 1260 mm
- Power = 220 V, 50Hz
- Motor - 2300 W
-
- Wire range - 10-240 mm2
- Crimping force - 300kN
- Stroke - 350 mm
- Crimping width - 12,5mm (other size can be special ordered)
- Weight - 120 kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
- Wire range - 10-120 mm2 (Min:AWG10#，240 mm2 can be special ordered）
- Crimping force - 200KN
- Stroke - 350mm
- Crimping width - 12.5mm (other size can be special ordered)
- Weight - 120kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
- Outer dimension: 420 x 580 x 320 mm
- Weight: 35 kg
- Display: 128 x 80 Blue LCD in Chinese
- Power supply: AC215-235V ≦50/Hz
- Power: 120 - 250 W
- Cutting length: 1mm-99999,9mm
- Middle stripping: 13 stripping positions in the middle.
- Stripping length: Stripping head: 0,1 - 30mm, stripping end: 0,1 - 30mm
- Applicable wire core area: 0.1-2.0mm2 *2 (AWG11#-28#) x2
- Cutting tolerance: 0,002 x L mm (within) x L= cutting length
- Twisting range: AWG11#-28# (double line)
- Twisting length: 0-30mm
- Max. Guide bushing diameter: 1,5-5mm
- Blade materials: imported high speed steel, tungsten steel
- Drive: 4 Wheels driving
- Stripping capacity per hour: 4000-10000 pieces
- Wire pressure adjustment: have
- Pulse equivalent: no error within 1 m.
- Program: it can storage 200 programs; it doesn’t need to reset parameters while changing the different wire.
- Total: 999999 pieces
- Batch: 99999 pieces
- Blade motor precision: 0,03mm
- Precision for inlet and outlet motor: mute mixed stepping motor, each step is about 0,1mm
- Remarked function: automatic pre-feeding and discharging, time sets for automatic starting, exclusive striping and discharging the wire. The program 96 is for processing the super short wire.
- The shortest twisting function: the wire could be twisted while the middle part of the wire skin length remains 26mm.
-
Wire Type - 1-25mm2 (AWG3 # -18 #) Features - Cutting, skinning, half-skinning Number of layers - Max 1 Dimensions - 420 x 297 x 345mm Weight - 33 Kg -
- Wire range - within 20pin, AWG28#：1-20pin； AWG26#：1-15pin； AWG24#：1-12pin
- Cutting length - 30 - 99999 mm
- Dividing length - 1 - 200 mm
- Cutting precision - ±（0,2%*L+1）mm
- Stripping length - wire head 0,1-30mm , wire end 0,1-30 mm
- Capacity - 1000-3000 pcs/h
- Tool materials - Imported tungsten steel and high speed steel
- Drive: 4 wheels driven
- Feeding speed: 0,7m/s
- Power - 220V 50HZ
- Motor - 0,3KW
- Air supply - 0,3MPa - 0,5 MPa
- Weight - 31kg
- Dimension - 460×297×345 mm
