- Power - AC 220V, 50/60Hz Single phase
- Function - Wire cutting、single end strip、double end strip、single end half strip、double end half strip、single end twisting、single end crimping，single end tinning
- Cutting length - 30mm-99999.9mm
- Stripping length - Wire head：0,1mm-7mm
- Twisting length - 3mm - 7mm
- Tube diameter - ɸ 1.5mm-5mm
- Cross section - AWG#16-AWG#32
- Crimping force - 2.0T
- Working speed - 4000-5000pcs/hour
- Crimping position - Digital adjustment
- Detection device - Low air pressure、wire lack or not、punch unwell、Wire knotting
- Tool material - tungsten steel/ high speed steel
- Dimension - 900mm*600mm*1400mm（Excluding raised part）
- Weight - 250kg
-
-
- Wire range - 4-6mm² (Other size can be special ordered）
- Cutting length - 60-99999mm (Other size can be special ordered）
- Cutting precision - ±（0.2%*L+1）mm
- Stripping length - 0,1-18,5mm
- Feeding speed - Max. 8,0 m/s
- Crimping force - 30kN
- Voltage - 220V, 50HZ
- Air supply - 0,5 MPa-0,7 MPa，8m³/h
- Weight - 1100kg
- Dimension - 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, air pressure, bare wire and lack of terminal crimping detecting;
- Applicator range - OTP applicator, European applicator and pneumatic applicator
- It can be equipped with pressure monitoring system, monitoring the pressure during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping(it is optional)
-
- Application - suitable for AC wire, HDMI wire, network cable, PC wire, earphone wire, video wire, etc..
- Applicable wire - 1,5mm＜= OD＜=15,0mm
- Wire length - 0,6-6m
- Front length - 200mm
- Rear size - 0-200mm
- Coiling size - 0-300mm
- Middle coiling - 0-300mm
- Wire coiling shape - suitable for coiling 8-shaped wire
- Capacity - ≦1980pcs/h (Depending on the wire material )
- Voltage - 210-240V 5A
- Air supply - 0.5-0.6MPa
- Dimension - 1700 x 600 x 1600mm
- Weight - 300kg
- Function - wire cutting, wire winding and wire tying
-
BZW-FX8060 Automatický odvíječ drátů s velkým průměrem. -
Automatický stroj BZW-2.0X má funkci stříhání kabelu, odstraňování izolace a lisování terminálů. Výjimečný vzhled a kompaktní konstrukce, úspora místa a moderní vzhled. Jednoduchá a rychlá výměna náhradních dílů, plná digitální diagnostika a snadná údržba. -
Dva kabely mohou být zpracovávány současně a dosahuje se vysoké pracovní účinnosti. Řízení počítačem, ovládání tlačítky, stabilní pracovní výkon a snadná obsluha. Rychlost podávání, střihu a odizolování kabelu lze nastavit samostatně, aby se dosáhlo nejlepšího účinku zpracování. Má funkci nastavení celkového počtu, počtu balíčků, časového zpoždění, střihu středu atd. Řadič motoru využívající metodu dělení s vysokou přesností a dlouhou životností. V paměti BZW-882D2 lze uložit až 100 nastavení zpracování kabelů. -
1. Počítačové ovládání, dotykový displej, servomotor, snadné ovládání. 2. Rychlost podávání kabelu, střihu kabelu a odstraňování izolace lze nastavit nezávisle, aby dosáhly nejlepšího efektu odstraňování izolace. 3. Má funkci nastavení celkového množství, počtu svazků, zpoždění času atd. 4. Motorový pohon využívající metodu dělení, s vysokou přesností a dlouhou životností. 5. V systému lze uložit 100 sad nastavení. -
Polootomatizovaná linka BZW-6.0FK01 je hlavně používána pro zpracování kabelů Fakra. Stroj je vyroben v modulárním stylu, vyznačuje se stabilním výkonem a vysokým koeficientem kvality. Může také provádět inteligentní řízení, sledovat záznamy inspekcí a výrobních postupů během denní práce, a také se může spojit se systémem MES (Manufacturing Execution System) a sdílet data za účelem zlepšení kvality produktu a snížení nákladů na práci. -
BZW-F4+G je moderní stroj pro stiskování terminálů značky Harting, který nabízí stabilní provoz a snadnou obsluhu. Díky své kompaktní konstrukci a pokročilým funkcím je ideálním řešením pro výrobce hledající efektivní nástroj pro stiskávání terminálů typu Harting. BZW-F4+G disponuje funkcemi odstranění izolace, ovinování, navlékání a stisknutí, co výrazně zvyšuje výrobní výkon. -
- Wire diameter range - 0.05-10mm2
- Shut height - 135.8mm
- Stroke 40mm
- Applicable machine type - Semi-automatic terminal crimping machine
- Dimension 185 x 165 x 160 mm
- Weight 8kg
-
- Suitable for different wire diameter.
- Suitable for different model of PV junction box.
- Applicable machine type : BZW-4T-C Mute terminal crimping machine
- Shut height : 125mm
- Stroke : 30-40mm
- Weight :10kg
- Dimension : 130 x 130 x 150mm
-
- Crimping force - 40 kN
- Features - crimping machine for Junction box,
- Dimensions - 1050 x 610 x 1500mm,
- Weight - 120 kg,
-
- Feeding mode - horizontal
- Shut height - 135,78 mm
- Feeding - Max. 40 mm
- Terminal thickness Max. 1,2 mm
- Applicable wire diameter 0,08-6 mm2 (9-30AWG)
- Feeding structure pneumatic
- Weight 6 kg
- Dimension 180 x 155 x 110 mm
- Stroke 40/30 mm
- Application Semi-automatic / Full automatic terminal crimping machine
-
- Measure range - 0-1000N
- Measure mode - Manual
- Testing speed - 30~300 mm/min
- Stroke - 570mm
- Counting function - 9999 cycle
- Voltage - AC 220V
- Weight - 40 kg
- Dimension :360 x 255 x 1000 mm
-
- Materiál - Vysoce uhlíková ocel
- Použití - Poloautomatizované zařízení pro zacvakávání terminálů
- Suw - 30mm
- Váha - 4,4 kg
-
- Wire size: 0,1 - 2,5mm² (AWG12-36) (special size could be ordered)
- Pre-feeding device: servo motor (it is optional)
- Capacity: 4000 - 4200 pcs/hour (the length of each piece is less than 100mm)
- Function: double ends for wire striping and crimping, single end for semi stripping, single end for crimping.
- The adjusting method for blade: microprocessor controlled system + high precision stepping motor driving.
- Cutting length: 35 - 100000 mm (special length could be order)
- Cutting precision: adjusting range 0,5mm + cutting length * 0,5% below
- Stripping length: 1-10mm (special length could be ordered)
- Equipped die: OTP horizontal die, straight die, European style die, Korean die and etc.
- Crimping machine: frequency conversion mute crimping machine
- Control: PLC, touching screen.
- Inspecting items: inspection for wire tangle, defective wire, pre-feeding, wire crimping, and air pressure.
- Power supply: AC 230V/110V 50/60Hz
- Compressed air: 0,5 MPa about 140 N/min
- Outer dimension: 700 x 800 x1500 mm
- Weight: about 300kg
-
- Cable Type – 0,3 – 6 mm² (AWG9 # – AWG23 #), other sizes on request,
- Features – wire cutting, wire stripping, half stripping, one and two-sided crimping,
- Dimensions – 3500 x 1200 x 1700mm,
- Weight -1100 kg.
-
- Cross range AWG22#-AWG28#
- Max. wire pin 20P
- Max. wire width 28 mm
- Single wire width 0,8 - 2,5 mm
- Cutting length 72 - 9999 mm
- Cutting precision ±0,5 mm
- Stripping length 2 - 10 mm
- Crimping force 20 kN
- Capacity 18000PCS/H (20P ribbon cable)
- Power 230V, 50 Hz
- Motor 0,75 kW
- Air supply 0,4 - 0,6 MPa, filtered and dry air
- Weight about 585 kg
- Dimension 1580 x 1345 x 2000 mm
- Function - single end crimping, double ends crimping, interval crimping, positive and negative crimping
-
- Wire range 0,3 - 2,5mm² (AWG13-AWG23) (Other size can be special ordered）
- Cutting length 35 mm~6500 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6.0 m/s
- Capacity 5000 - 5500 pcs/h (within length 100mm)
- Crimping force 20kN
- Voltage 230V, 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa-0,7 MPa，6m³/h
- Weight about 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping
-
- Cutting length 45-600 mm（length can be specified）
- A- end stripping length：0 -5 mm
- B- end stripping length：0-10 mm
- Twisting length 3-8 mm
- Wire type AWG28#-18#flat wire and electronic wire
- Max. wire width 28mm
- Max. wire pin 24P
- Capacity 10000PCS／H(12P flat wire)
- Air supply 0,4 MPa - 0,6 MPa
- Power 220V, 50Hz
- Weight about 500kg
- Dimension 940 x 1100 x 1850 mm
- Function A-end terminal interval crimping, B-end wire twisting and tinning;
- Cutting length 45-600 mm（length can be specified）
-
- Wire range 0,1 - 2,5 mm² (AWG23-AWG13) (Other size can be special ordered）
- Cutting length 35 mm~100000 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Twisting length 4 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6,0 m/s
- Capacity 4500 - 5000 pcs/h (within length 100mm)
- Crimping force 20 kN
- Voltage 230V 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa - 0,7 MPa，6m³/h
- Weight 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping, single end twisting
- Detecting ability wire knotting, wire lacking, terminal lacking and air pressure detecting
- Applicator range Stroke 30 mm (40 mm stoke can be special ordered)
-
- Wire range: 10-120 mm² (AWG6#-AWG0000#),
- Crimping force: 160 kN,
- Rated power: 7,5 kW,
- Average power:3,5 kW
- Power: 380 V / 50 Hz, three phase
- Dimension: 900 x 1000 x 2000 mm
- Weight: 900 kg
- Stroke: 40 mm (50 mm is optional)
-
- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
-
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
-
- Wire range: 0,1-2 mm2 (AWG27#-AWG14#) (Other size can be specially ordered)
- Stripping length: 1-15 mm
- Stripping type：Pneumatic
- Crimping force: 20 kN
- Air supply：0.3~0.4 Pa
- Rated power: 0,75 kW
- Average power: 0,45 kW
- Power: 220V/50Hz
- Dimension: 500 x 350 x 730 mm
- Weight: 70 kg
- Stroke: 30 mm (40 mm is optional)
- Functions: stripping and terminal crimping, especially for cable core, hairline，multi-layers shielded wire and network wire.
-
- Crimping force 60KN
- Rated power 1,5KW
- Average power 0,55KW
- Power 220V/50Hz
- Dimension 400 x 320 x 800mm
- Weight 105KG
- Stroke 30mm (40mm is optional)
-
- Specification: 270 x 260 x 640 mm
- Crimping force: 20kn
- Weight: 54kg
- Average power consumption: 0,45kw
- 5.Motor power: 0,75 kW
- Power: 220v 50Hz
- Stroke: 30mm (40mm could be ordered)
-
- Crimping force - Max.40kN
- Rated power - Max.2,0kW
- Power - 220 V, 50Hz
- Dimension - 1050 x 600 x 1500 mm
- Weight - 120KG
- Stoke - 30 mm, 40 mm common use
- Applied applicator - OTP applicator, pneumatic applicator, European applicator
-
- Wire range - 10-120 mm2 (Min:AWG10#，240 mm2 can be special ordered）
- Crimping force - 200KN
- Stroke - 350mm
- Crimping width - 12.5mm (other size can be special ordered)
- Weight - 120kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
- Wire range - 10-240 mm2
- Crimping force - 300kN
- Stroke - 350 mm
- Crimping width - 12,5mm (other size can be special ordered)
- Weight - 120 kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
- Wire range - 10-120mm²
- Crimping force - 200KN
- Diameter. Max 38mm
- Crimping width - 12,5mm (Can be special ordered )
- Weight - 160kg
- Dimension - 700 × 860 × 1260 mm
- Power = 220 V, 50Hz
- Motor - 2300 W
-
- Crimping force: 15KN
- Capacity : 250 pcs / min
- Average electric consumption rate : 0.35KW
- Motor : 0.55KW
- Voltage : AC220V , 50Hz
- Stroke : 23mm
- Air supply : 0.5 Mpa-0.7 Mpa
- Dimension: 300 x 350 x 580mm
- Weight : 50kg
- Copper belt size : 2mm/4mm/6mm
- Feeding mode : By mechanical feeding
- Application : Connection between neon lamp and resistance, connection among wires, connection between slide switch and wire, and connection among thermal sensors such as magnetic reed switch and temperature fuse.
-
- Crimping range 0.5 - 2.5mm2 (AWG 20-14)
- Crimping length 6/8/10mm
- Power supply 230V/50Hz/60V
- Air pressure 5 bar
- Cycle time approx 1.0 second
- Dimension 400 x 340 x 450 mm
- Weight 32 kg
-
- Max. Processing wire diameter - 6,99mm
- Min. processing wire diameter - 0,81mm
- Cutting depth - 0,01mm
- Max. stripping length - 48mm
- Max. stripping layers - 9 layers
- Drive Model - motor/ball screw driving
- Displaying - touching screen
- Blade materials - 2 pieces, imported tungsten steel.
- Clamping device automatic centralized, motor driving, clamping force control
- Capacity - 500 - 700 pcs/h (it depends on the type and length of the cable)
- Machine starting method - manual/sensitive
- Power supply - 220V, 50Hz
- Power - 380W
- Weight - 19kg
- Outer dimension - 190 x 285 x 530 mm
- Working environment - 50℃, Medium drying workshop, without vibrating working table
-
- Applied wire - large size coaxial cable and automotive cable ,
- Power - AC 220V / 110V, 50/60Hz,
- Motor - 800W,
- Stripping length setting unit - 0,01 mm ,
- Cutting wire diameter - 3,0-25 mm,
- Cutting depth setting unit - 0,01 mm,
- Stripping method - rotary cutter,
- Stripping layer - Max.9 layers ,
- Capacity - 300-800 pcs/h ,
- Dimension 1000 x 225 x 400 mm,
- Weight 50 kg,
-
Mainly used for stripping sheathed stranded wire and single core wire. Exquisite design, compact structure and easy operation. The function of synchronously stripping multi-wire which can increase the productivity and also the product quality. -
- Stripping diameter - ⌀10 mm - ⌀50 mm
- Control system - PLC control with touch screen
- Functions - Removing the insulation
- Dimensions - 1400 x 330 x 420mm
- Weight - 110 Kg
-
- Stripping diameter - max. ø15 mm,
- Functions - wire stripping,
- Dimension - 480 x 330 x 280mm
- Weight - 45 kg.
-
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension - 600 x 420 x 360mm
- Weight - 30 kg
-
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension 950 x 350 x 280 mm,
- Weight 45 kg.
-
- Stripping diameter - max. ø30 mm,
- Functions - wire stripping,
- Dimension - 615 x 425 x 375mm
- Weight - 40 kg
