- Crimping force: 15KN
- Capacity : 250 pcs / min
- Average electric consumption rate : 0.35KW
- Motor : 0.55KW
- Voltage : AC220V , 50Hz
- Stroke : 23mm
- Air supply : 0.5 Mpa-0.7 Mpa
- Dimension: 300 x 350 x 580mm
- Weight : 50kg
- Copper belt size : 2mm/4mm/6mm
- Feeding mode : By mechanical feeding
- Application : Connection between neon lamp and resistance, connection among wires, connection between slide switch and wire, and connection among thermal sensors such as magnetic reed switch and temperature fuse.
Semi automatic machines for precise crimping are high performance, using a small working space. Wide range of processed wires and terminals. Designed for single and multi-core, round, flat and ribbon cables. Crimping force from 25KN to 160KN. Characterized by high precision and efficiency. Compatible with CFM system – crimping force monitor. Easy to use and service.
-
-
Wire range 0,3 - 2,5mm² (AWG13-AWG23) (Other size can be special ordered） Cutting length 35 mm~6500 mm (Other size can be special ordered） Cutting precision ±（0.2%*L+1）mm Stripping length 0,1 - 10 mm (Other size can be special ordered） Feeding speed Max.6.0 m/s Capacity 5000 - 5500 pcs/h (within length 100mm) Crimping force 20kN Voltage 230V, 50Hz Motor 0,75 kW Air supply 0,5 MPa-0,7 MPa，6m³/h Weight about 200 kg Dimension 650 x 700 x 1500 mm Function - single end half stripping, single end crimping -
- Wire range: 10-120 mm² (AWG6#-AWG0000#),
- Crimping force: 160 kN,
- Rated power: 7,5 kW,
- Average power:3,5 kW
- Power: 380 V / 50 Hz, three phase
- Dimension: 900 x 1000 x 2000 mm
- Weight: 900 kg
- Stroke: 40 mm (50 mm is optional)
-
- Crimping force - Max.40kN
- Rated power - Max.2,0kW
- Power - 220 V, 50Hz
- Dimension - 1050 x 600 x 1500 mm
- Weight - 120KG
- Stoke - 30 mm, 40 mm common use
- Applied applicator - OTP applicator, pneumatic applicator, European applicator
-
- Crimping force - 25kN
- Rated power - 0,75kW
- Average consumption - 0,45kW
- Power - 220V/50Hz
- Dimension - 360 x 550 x 680 mm
- Weight - 98 kg
- Stroke - 30 mm/40 mm
-
1. BZW-20TS Servo large terminal crimping machine can change different types of applicators according to different products. 2. Advanced servo motor and PLC control system. 3. Crimping force monitor is used to check if wire crimped qualified; crimping force exceed setting value, machine alarm and stop, and pop up crimping force anomaly window. 4.High-tech industrial computer, PLC and crimping force system , data can be stored and checked. 5.Data storage for different parameters, which allows continuous sequential crimping function. 6. Stable working, large crimping force, overload protection. 7. Applicators made of imported applicator steel, long durability. Note: user should upload data by themselves if connect with MES and server. -
- Specification: 270 x 260 x 640 mm
- Crimping force: 20kn
- Weight: 54kg
- Average power consumption: 0,45kw
- 5.Motor power: 0,75 kW
- Power: 220v 50Hz
- Stroke: 30mm (40mm could be ordered)
-
- Wire range: 0,1-2 mm2 (AWG27#-AWG14#) (Other size can be specially ordered)
- Stripping length: 1-15 mm
- Stripping type：Pneumatic
- Crimping force: 20 kN
- Air supply：0.3~0.4 Pa
- Rated power: 0,75 kW
- Average power: 0,45 kW
- Power: 220V/50Hz
- Dimension: 500 x 350 x 730 mm
- Weight: 70 kg
- Stroke: 30 mm (40 mm is optional)
- Functions: stripping and terminal crimping, especially for cable core, hairline，multi-layers shielded wire and network wire.
-
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
-
40 kN terminal crimping press. Cable processing machines. -
- Specification - 310 x 270 x 710 mm
- Crimping force - 40 kN
- Weight- 58 kg
- Average power consumption - 0,85kw
- Motor power - 1,5 kw
- Power - 220v 50Hz
- Stroke - 30mm (40mm could be ordered)
-
- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
-
- Crimping force 60KN
- Rated power 1,5KW
- Average power 0,55KW
- Power 220V/50Hz
- Dimension 400 x 320 x 800mm
- Weight 105KG
- Stroke 30mm (40mm is optional)
-
- Wire range - 10-120 mm2 (Min:AWG10#，240 mm2 can be special ordered）
- Crimping force - 200KN
- Stroke - 350mm
- Crimping width - 12.5mm (other size can be special ordered)
- Weight - 120kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
- Wire range - 10-240 mm2
- Crimping force - 300kN
- Stroke - 350 mm
- Crimping width - 12,5mm (other size can be special ordered)
- Weight - 120 kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
- Crimping width - 7mm (Can be special ordered)
- Crimping terminal size - ≤2.5mm²
- Dimension - 360*550*680mm
- Weight - 106kg
-
- Wire range - 10-120mm²
- Crimping force - 200KN
- Diameter. Max 38mm
- Crimping width - 12,5mm (Can be special ordered )
- Weight - 160kg
- Dimension - 700 × 860 × 1260 mm
- Power = 220 V, 50Hz
- Motor - 2300 W
-
- Crimping range - needle terminal: 0,5~16mm²(AWG20#-AWG5#)，pre-insulation/bare terminal: 0,1-10mm²(AWG28#-AWG7#)
- Crimping force - 15 kN
- Air supply - 0,5~0,7 MPa
- Dimension - 260 x 120 x 140 mm
- Weight - 4 kg
- Function - pneumatic crimping without any electricity.
-
- Crimping range 0.5 - 2.5mm2 (AWG 20-14)
- Crimping length 6/8/10mm
- Power supply 230V/50Hz/60V
- Air pressure 5 bar
- Cycle time approx 1.0 second
- Dimension 400 x 340 x 450 mm
- Weight 32 kg
-
BZW-F4+G is a modern machine for crimping Harting terminals, offering stable operation and easy handling. With its compact design and advanced features, it is the perfect solution for manufacturers seeking an efficient tool for crimping Harting-type terminals. BZW-F4+G features insulation removal, twisting, threading, and crimping functions, significantly increasing production efficiency. -
BZW-2.5T-HSD is a device that simultaneously strips insulation from two wires and then crimps a terminal on them. All parameters of the machine are set using a large and clear touchscreen. Proper execution of the operation is ensured by an optical sensor that checks the position of the processed wires. The device is intended for processing HSD cables High Speed Data - cables most commonly used in automotive for fast transmission of data between, for example, a computer and modules such as a 360-degree camera, display, USB port, etc. -
BZW-SF-4040T, a multifunctional terminal crimping press. Equipped with an advanced servo control system and an optional PC operating system. It offers unmatched data collection capabilities regarding crimping processes, allowing for real-time tracking and quality control. Moreover, this device can be integrated with MES systems, enhancing its utility in modern production setups.
