- Wire size: 0,1 - 2,5mm² (AWG12-36) (special size could be ordered)
- Pre-feeding device: servo motor (it is optional)
- Capacity: 4000 - 4200 pcs/hour (the length of each piece is less than 100mm)
- Function: double ends for wire striping and crimping, single end for semi stripping, single end for crimping.
- The adjusting method for blade: microprocessor controlled system + high precision stepping motor driving.
- Cutting length: 35 - 100000 mm (special length could be order)
- Cutting precision: adjusting range 0,5mm + cutting length * 0,5% below
- Stripping length: 1-10mm (special length could be ordered)
- Equipped die: OTP horizontal die, straight die, European style die, Korean die and etc.
- Crimping machine: frequency conversion mute crimping machine
- Control: PLC, touching screen.
- Inspecting items: inspection for wire tangle, defective wire, pre-feeding, wire crimping, and air pressure.
- Power supply: AC 230V/110V 50/60Hz
- Compressed air: 0,5 MPa about 140 N/min
- Outer dimension: 700 x 800 x1500 mm
- Weight: about 300kg
-
-
- Wire range 0,3 - 6 mm² (AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60 - 10000 mm (Other size can be special ordered）
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1 - 18 mm
- Feeding speed Max. 8,0 m/s
- Crimping force 30 kN
- Power 230V 50Hz
- Air supply 0,5 MPa - 0,7 MPa，8m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and terminal crimping lacking;
- Applicator range OTP applicator, European applicator and pneumatic applicator;
- It can be installed with CFM, monitoring the crimping quality during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, single end heat shrink tubing/jacketing inserting.
-
Cross section: 0,3 - 5 mm² (Other size can be special ordered) Cutting length: 60-10000mm (Other size can be special ordered) Cutting precision: ±(0.2%*L+1)mm Stripping length: 0,1 - 18 mm Feeding speed: Max. 8,0 m/s Wire collecting conveyor: 2 m, 4 m (Other size can be special ordered) Crimping force: 30 kN Power: 220V 50Hz Air supply: 0,5 MPa - 0,7 MPa, 8m³/h Weight: 1100kg Dimension: 3500 x 1200 x 1700 mm Detecting ability: wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and seal detecting. Applicator range: stroke is 30 and 40 mm . -
1. BZW-20TS Servo large terminal crimping machine can change different types of applicators according to different products. 2. Advanced servo motor and PLC control system. 3. Crimping force monitor is used to check if wire crimped qualified; crimping force exceed setting value, machine alarm and stop, and pop up crimping force anomaly window. 4.High-tech industrial computer, PLC and crimping force system , data can be stored and checked. 5.Data storage for different parameters, which allows continuous sequential crimping function. 6. Stable working, large crimping force, overload protection. 7. Applicators made of imported applicator steel, long durability. Note: user should upload data by themselves if connect with MES and server. -
- Computerized control, touch screen, servo motor, more stable and easy to operate;
- High speed wire stripping, wire head, wire end and total length can be set randomly within the wire cutting range;
- The speed of wire feeding, wire cutting and stripping can be set independent, to reach the best effect of stripping;
- BZW-882DJ has the function of setting total quantity, bundle quantity, time postpone, middle stripping and etc;
- Motor drive using subdivision method, with high precision and long service life;
- 100kinds of different wire date can be stored in the system.
-
Two wires can be processed at the same time, ensuring high work efficiency. Computer control, button operation, stable work performance, and easy operation. The feeding speed, cutting, and wire can be set separately to achieve the best processing effect. It has functions such as setting the total quantity, quantity of packages, time delay, middle skinning, etc. The motor controller uses a division method, with high precision and long service life. Up to 100 wire processing settings can be stored in the memory of BZW-882D2. -
This is a new mode cable processing machine controlled by micro computer, especially used for processing the wire harness in the industry of automobiles, power cable industry, electronic control cabinet ,charging point wire harness, charging gun wire harness, PV hard wire, BVR flexible wires. It can process coils of wire by setting its total length, head stripping and rear stripping as required, which greatly improves working efficiency. Automatic wire cutting, stripping on two ends, and multi-layers stripping at one time. Industrial level control chip and high precise servo driver, which ensure high speed and stable running for long lifetime. Motion controller, touching screen operation, up to 100 stripping archives can be stored. Automatic wire diameter adjustment, there is no need to change cutting tools for different cables. The cable of outer diameter under 14 mm can be easily processed, the strong driving force ensures the high working efficiency. The machine is multi-functional, there have been reserved some communication ports for connecting auxiliary devices. Auxiliary devices: automatic wire feeder, wire collecting device, mechanical arms, wire winding unit and so on. -
BZW-2.0X machine has the function of wire cutting, stripping and terminal crimping. PLC control system. Exquision appearance and compact structure, space saving and artistic appearance. Simple and quick replacement of the spare parts, full digital troubleshooting, and easy to maintenance. -
BZW-3.0 C C PM 4M is upgrade of automatic high precise double ends terminal crimping machine. Mainly for power, automotive, new energy industry wire hamess preocessing. BZW-3.0 C C PM 4M can realize long wire cuttin, wire stripping, marking, waterproof seal inserting and double ends terminal crimping at the same time. -
The BZW-886D machine is designed for stripping coaxial cables. The machine is characterized by high efficiency and a wide stripping range from 0.1 mm to 200 mm. Powered by 230V AC. The BZW-886D allows for stripping up to 9 layers. Stripping is performed using rotary blades which ensures very high precision and speed of operation.
