- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
- Crimping force - Max.40kN
- Rated power - Max.2,0kW
- Power - 220 V, 50Hz
- Dimension - 1050 x 600 x 1500 mm
- Weight - 120KG
- Stoke - 30 mm, 40 mm common use
- Applied applicator - OTP applicator, pneumatic applicator, European applicator
- Crimping range - needle terminal: 0,5~16mm²(AWG20#-AWG5#)，pre-insulation/bare terminal: 0,1-10mm²(AWG28#-AWG7#)
- Crimping force - 15 kN
- Air supply - 0,5~0,7 MPa
- Dimension - 260 x 120 x 140 mm
- Weight - 4 kg
- Function - pneumatic crimping without any electricity.
- Crimping force - 25kN
- Rated power - 0,75kW
- Average consumption - 0,45kW
- Power - 220V/50Hz
- Dimension - 360 x 550 x 680 mm
- Weight - 98 kg
- Stroke - 30 mm/40 mm
- Crimping width - 7mm (Can be special ordered)
- Crimping terminal size - ≤2.5mm²
- Dimension - 360*550*680mm
- Weight - 106kg
- Specification - 310 x 270 x 710 mm
- Crimping force - 40 kN
- Weight- 58 kg
- Average power consumption - 0,85kw
- Motor power - 1,5 kw
- Power - 220v 50Hz
- Stroke - 30mm (40mm could be ordered)
- Crimping force 60KN
- Rated power 1,5KW
- Average power 0,55KW
- Power 220V/50Hz
- Dimension 400 x 320 x 800mm
- Weight 105KG
- Stroke 30mm (40mm is optional)
- Specification: 270 x 260 x 640 mm
- Crimping force: 20kn
- Weight: 54kg
- Average power consumption: 0,45kw
- 5.Motor power: 0,75 kW
- Power: 220v 50Hz
- Stroke: 30mm (40mm could be ordered)
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
- Wire range: 0,1-2 mm2 (AWG27#-AWG14#) (Other size can be specially ordered)
- Stripping length: 1-15 mm
- Stripping type：Pneumatic
- Crimping force: 20 kN
- Air supply：0.3~0.4 Pa
- Rated power: 0,75 kW
- Average power: 0,45 kW
- Power: 220V/50Hz
- Dimension: 500 x 350 x 730 mm
- Weight: 70 kg
- Stroke: 30 mm (40 mm is optional)
- Functions: stripping and terminal crimping, especially for cable core, hairline，multi-layers shielded wire and network wire.
- Crimping range 0.5 - 2.5mm2 (AWG 20-14)
- Crimping length 6/8/10mm
- Power supply 230V/50Hz/60V
- Air pressure 5 bar
- Cycle time approx 1.0 second
- Dimension 400 x 340 x 450 mm
- Weight 32 kg
- Crimping force: 15KN
- Capacity : 250 pcs / min
- Average electric consumption rate : 0.35KW
- Motor : 0.55KW
- Voltage : AC220V , 50Hz
- Stroke : 23mm
- Air supply : 0.5 Mpa-0.7 Mpa
- Dimension: 300 x 350 x 580mm
- Weight : 50kg
- Copper belt size : 2mm/4mm/6mm
- Feeding mode : By mechanical feeding
- Application : Connection between neon lamp and resistance, connection among wires, connection between slide switch and wire, and connection among thermal sensors such as magnetic reed switch and temperature fuse.
- Power - AC 220V, 50/60Hz Single phase
- Function - Wire cutting、single end strip、double end strip、single end half strip、double end half strip、single end twisting、single end crimping，single end tinning
- Cutting length - 30mm-99999.9mm
- Stripping length - Wire head：0,1mm-7mm
- Twisting length - 3mm - 7mm
- Tube diameter - ɸ 1.5mm-5mm
- Cross section - AWG#16-AWG#32
- Crimping force - 2.0T
- Working speed - 4000-5000pcs/hour
- Crimping position - Digital adjustment
- Detection device - Low air pressure、wire lack or not、punch unwell、Wire knotting
- Tool material - tungsten steel/ high speed steel
- Dimension - 900mm*600mm*1400mm（Excluding raised part）
- Weight - 250kg
- Max. Processing wire diameter - 6,99mm
- Min. processing wire diameter - 0,81mm
- Cutting depth - 0,01mm
- Max. stripping length - 48mm
- Max. stripping layers - 9 layers
- Drive Model - motor/ball screw driving
- Displaying - touching screen
- Blade materials - 2 pieces, imported tungsten steel.
- Clamping device automatic centralized, motor driving, clamping force control
- Capacity - 500 - 700 pcs/h (it depends on the type and length of the cable)
- Machine starting method - manual/sensitive
- Power supply - 220V, 50Hz
- Power - 380W
- Weight - 19kg
- Outer dimension - 190 x 285 x 530 mm
- Working environment - 50℃, Medium drying workshop, without vibrating working table
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6Mpa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43KG
Applicable tube diameter - ø1 - ø100 mm Applicable tube type - heat-shrink tube, ribbon cable, shielding wire, etc; It can add hot-melt cutter to process the color ribbon belt and nylon braid. Cutting length - 2 mm - 10000 mm Cutting width - 1-100 mm Cutting tolerance - 0,02 x L, ±0.2 mm Capacity - 10800 PCS/H (Depending on tube material ) Speed adjustment - 00-99 Cutter material - Tungsten steel Voltage - AC220V/50Hz Power - 170W Dimension - 350 x 250 x 320 mm Weight - 23kg
- Applied wire diameter - AWG14-32# (0.03-2.08mm2)
- Wire type - thin wires such as PVC, solid core wire, single stranded wire, rubber wire, computer core wire, and telephone wire, etc..
- Stripping length - 1-20mm
- Diameter precision - 0,01mm Processing time about - 0,3pcs/s
- Stroke - 20mm
- Air supply - 0,5MPa-0,8Mpa
- Weight - 3,5kg
- Dimension - 260 x 150 x 270 mm
- Measure range - 0-1000N
- Measure mode - Manual
- Testing speed - 30~300 mm/min
- Stroke - 570mm
- Counting function - 9999 cycle
- Voltage - AC 220V
- Weight - 40 kg
- Dimension :360 x 255 x 1000 mm
Material - Tungsten Steel / High speed steel Compatible - Automatic terminal crimping machine
- Wire range: 2.5 - 70mm
- Combing length: 150 mm (other size can be special ordered)
- Weight: 42 kg
- Dimension: 530 x 320 x 290mm
- Voltage: 220V/50Hz
- Power: 240W
- Speed: 3 s/pcs (adjustable)
- Terminal arrangement - Vertical
- Applicable mechine type - semi-automatic / full automatic terminal crimping machine
- Stroke - 40 mm
- Weight - 6,3 kg
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6 MPa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43 kg
- Application range - Electronic connecting wire, braided tube, jacket tube, motor coils, home appliances, cable, etc.
- Tie length - 60mm/80mm/100mm/120mm/150mm
- Capacity - 1500PCS/h ( Depending on products )
- Power - AC220V 50/60HZ
- Power - 100W
- Dimension - 1230 x 550 x 800 mm
- Weight - 150kg
- Application - suitable for AC wire, HDMI wire, network cable, PC wire, earphone wire, video wire, etc..
- Applicable wire - 1,5mm＜= OD＜=15,0mm
- Wire length - 0,6-6m
- Front length - 200mm
- Rear size - 0-200mm
- Coiling size - 0-300mm
- Middle coiling - 0-300mm
- Wire coiling shape - suitable for coiling 8-shaped wire
- Capacity - ≦1980pcs/h (Depending on the wire material )
- Voltage - 210-240V 5A
- Air supply - 0.5-0.6MPa
- Dimension - 1700 x 600 x 1600mm
- Weight - 300kg
- Function - wire cutting, wire winding and wire tying
- tying belt length - 75-140 mm
- tying diameter - 5-30 mm
- winding outer diameter - 50-200 mm
- winding distance - 100-200 mm
- tying speed - 0,6 time/second
- winding speed - 1-10 laps/second tying belt - encapsulated iron core
- power - AC 220 V, 60 Hz
- rate power - <200 W
- weight - 40KG
- dimension - 500 x 300 x 400 mm
- Wire range - 4-6mm² (Other size can be special ordered）
- Cutting length - 60-99999mm (Other size can be special ordered）
- Cutting precision - ±（0.2%*L+1）mm
- Stripping length - 0,1-18,5mm
- Feeding speed - Max. 8,0 m/s
- Crimping force - 30kN
- Voltage - 220V, 50HZ
- Air supply - 0,5 MPa-0,7 MPa，8m³/h
- Weight - 1100kg
- Dimension - 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, air pressure, bare wire and lack of terminal crimping detecting;
- Applicator range - OTP applicator, European applicator and pneumatic applicator
- It can be equipped with pressure monitoring system, monitoring the pressure during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping(it is optional)
- Crimping force - 40 kN
- Features - crimping machine for Junction box,
- Dimensions - 1050 x 610 x 1500mm,
- Weight - 120 kg,
- Capacity - 15-20 pcs/min,
- Function - automatically tighten the nut of the junction box as per the requirement,
- Air supply - 0.5 Mpa-0.7 Mpa (dry and clean air source),
- Power - AC 220 V, 50/60Hz,
- Dimension - 600 x 500 x 1200mm
- Power - AC 220V, 50/60 Hz,
- Function - Tightening nuts of connector to the required position,
- Capacity - 15-20 pcs/min,
- Inspecting device - The tightening distance is controlled by the distance or the torque force,
- Dimension - 500 x 400 x 280 mm,
- Weight - 50 kg.
- Applied range:5-30mm (other size can be special ordered)
- Application: charging cable nuts tighten
- Weight: 80kg
- Dimension:550×320×350mm
- Motor:400W
- Capacity:15-20pcs/min
- Connector type -According to the client's requirements
- Functions - Automatic assembly of connectors
- Precision -> 99%
- Capacity - 15 - 20 pieces per minute
- Applied wire - middle size coaxial cable
- Voltage - AC220V/110V, 50/60 Hz
- Motor - 600 W
- Stripping length - 0,1 mm - 90 mm
- Stripping length setting unit - 0,01 mm
- Cutting wire diameter - 3,0 - 15 mm
- Cutting depth setting unit - 0,01 mm
- Stripping method- rotary cutter
- Stripping layer - Max.9 layers
- Capacity - 400-800 pcs/h
- Dimension - 720 x 230 x 350 mm
- Weight - 40 kg
- Applied wire - large size coaxial cable and automotive cable ,
- Power - AC 220V / 110V, 50/60Hz,
- Motor - 800W,
- Stripping length setting unit - 0,01 mm ,
- Cutting wire diameter - 3,0-25 mm,
- Cutting depth setting unit - 0,01 mm,
- Stripping method - rotary cutter,
- Stripping layer - Max.9 layers ,
- Capacity - 300-800 pcs/h ,
- Dimension 1000 x 225 x 400 mm,
- Weight 50 kg,
- Diameter of the wire - ø0,64 mm - ø4,0 mm
- Funkcje - Automatic coaxial cable cutting and stripping (9 layers)
- Dimensions - 800 x 700 x 440 mm
- Weight - 100 kg
- Diameter of the wire - ø1,0 - ø5,5 mm
- Funkcje - Automatic coaxial cable cutting and stripping (9 layers)
- Dimensions - 800 x 700 x 440 mm
- Weight - 100 kg
- Cutting diameter - 1-200 mm
- Features - Cutting of cable tubes
- Dimension - 350 x 250 x 320 mm
- Weight - 65 kg
- Tube diameter range - ø5- ø35 mm
- Features - corrugated tube cutting
- Dimension - 560 x 440 x 400mm
- Weight - 72 kg
- Stripping diameter - ø0,75 mm² to ø95 mm²,
- Functions - wire stripping,
- Dimension - 350 x 300 x 400mm
- Weight - 20 kg.
- Stripping diameter - max. ø7 mm,
- Functions - wire stripping,
- Dimension - 400 x 300 x 270 mm,
- Weight - 20 kg.
-
- Stripping diameter - max. ø15 mm,
- Functions - wire stripping,
- Dimension - 480 x 330 x 280mm
- Weight - 45 kg.
-
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension - 600 x 420 x 360mm
- Weight - 30 kg
- Stripping diameter - max. ø30 mm,
- Functions - wire stripping,
- Dimension - 615 x 425 x 375mm
- Weight - 40 kg
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension 950 x 350 x 280 mm,
- Weight 45 kg.
- Stripping diameter - ⌀10 mm - ⌀50 mm
- Control system - PLC control with touch screen
- Functions - Removing the insulation
- Dimensions - 1400 x 330 x 420mm
- Weight - 110 Kg
- Stripping range : 0,1 - 2,5mm²(AWG13#-AWG28#)
- Applied wire type: computer core wire, shielding wire, telephone wire, flat wire, etc.
- Stripping length : 20mm
- Stroke: 20mm
- Air supply: 0,5MPa - 0,7 Mpa
- Weight : 9,5 kg
- Voltage: AC110V/220V 50/60Hz
- Dimension : 260 x 150 x 270 mm
- Stripping capacity and specification 1-10 pieces/ time, AWG#18-#32
- Air pressure 4- 7,5kg
- Weight 15kg
- Min. cutting length 2,5mm
- Stripping and stripping length 2,5 - 25 mm
- Power 90 W
- Max. cutting length 25 mm
- Stripping capacity 120-30 times/minute, adjustable
- Power supply 220V/ 50Hz
- Stripping range 0,1 - 0,75 mm2
- Outer dimension 320 x 230 x 300 mm
