- Wire range - 10-120 mm2 (Min:AWG10#，240 mm2 can be special ordered）
- Crimping force - 200KN
- Stroke - 350mm
- Crimping width - 12.5mm (other size can be special ordered)
- Weight - 120kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
-
- Wire range - 10-240 mm2
- Crimping force - 300kN
- Stroke - 350 mm
- Crimping width - 12,5mm (other size can be special ordered)
- Weight - 120 kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
- Wire range - 10-120mm²
- Crimping force - 200KN
- Diameter. Max 38mm
- Crimping width - 12,5mm (Can be special ordered )
- Weight - 160kg
- Dimension - 700 × 860 × 1260 mm
- Power = 220 V, 50Hz
- Motor - 2300 W
-
- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
-
- Crimping force - Max.40kN
- Rated power - Max.2,0kW
- Power - 220 V, 50Hz
- Dimension - 1050 x 600 x 1500 mm
- Weight - 120KG
- Stoke - 30 mm, 40 mm common use
- Applied applicator - OTP applicator, pneumatic applicator, European applicator
-
- Crimping range - needle terminal: 0,5~16mm²(AWG20#-AWG5#)，pre-insulation/bare terminal: 0,1-10mm²(AWG28#-AWG7#)
- Crimping force - 15 kN
- Air supply - 0,5~0,7 MPa
- Dimension - 260 x 120 x 140 mm
- Weight - 4 kg
- Function - pneumatic crimping without any electricity.
-
- Crimping force - 25kN
- Rated power - 0,75kW
- Average consumption - 0,45kW
- Power - 220V/50Hz
- Dimension - 360 x 550 x 680 mm
- Weight - 98 kg
- Stroke - 30 mm/40 mm
-
- Crimping width - 7mm (Can be special ordered)
- Crimping terminal size - ≤2.5mm²
- Dimension - 360*550*680mm
- Weight - 106kg
-
- Specification - 310 x 270 x 710 mm
- Crimping force - 40 kN
- Weight- 58 kg
- Average power consumption - 0,85kw
- Motor power - 1,5 kw
- Power - 220v 50Hz
- Stroke - 30mm (40mm could be ordered)
-
- Crimping force 60KN
- Rated power 1,5KW
- Average power 0,55KW
- Power 220V/50Hz
- Dimension 400 x 320 x 800mm
- Weight 105KG
- Stroke 30mm (40mm is optional)
-
- Specification: 270 x 260 x 640 mm
- Crimping force: 20kn
- Weight: 54kg
- Average power consumption: 0,45kw
- 5.Motor power: 0,75 kW
- Power: 220v 50Hz
- Stroke: 30mm (40mm could be ordered)
-
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
-
- Wire range: 0,1-2 mm2 (AWG27#-AWG14#) (Other size can be specially ordered)
- Stripping length: 1-15 mm
- Stripping type：Pneumatic
- Crimping force: 20 kN
- Air supply：0.3~0.4 Pa
- Rated power: 0,75 kW
- Average power: 0,45 kW
- Power: 220V/50Hz
- Dimension: 500 x 350 x 730 mm
- Weight: 70 kg
- Stroke: 30 mm (40 mm is optional)
- Functions: stripping and terminal crimping, especially for cable core, hairline，multi-layers shielded wire and network wire.
-
- Crimping range 0.5 - 2.5mm2 (AWG 20-14)
- Crimping length 6/8/10mm
- Power supply 230V/50Hz/60V
- Air pressure 5 bar
- Cycle time approx 1.0 second
- Dimension 400 x 340 x 450 mm
- Weight 32 kg
-
- Crimping force: 15KN
- Capacity : 250 pcs / min
- Average electric consumption rate : 0.35KW
- Motor : 0.55KW
- Voltage : AC220V , 50Hz
- Stroke : 23mm
- Air supply : 0.5 Mpa-0.7 Mpa
- Dimension: 300 x 350 x 580mm
- Weight : 50kg
- Copper belt size : 2mm/4mm/6mm
- Feeding mode : By mechanical feeding
- Application : Connection between neon lamp and resistance, connection among wires, connection between slide switch and wire, and connection among thermal sensors such as magnetic reed switch and temperature fuse.
-
- Power - AC 220V, 50/60Hz Single phase
- Function - Wire cutting、single end strip、double end strip、single end half strip、double end half strip、single end twisting、single end crimping，single end tinning
- Cutting length - 30mm-99999.9mm
- Stripping length - Wire head：0,1mm-7mm
- Twisting length - 3mm - 7mm
- Tube diameter - ɸ 1.5mm-5mm
- Cross section - AWG#16-AWG#32
- Crimping force - 2.0T
- Working speed - 4000-5000pcs/hour
- Crimping position - Digital adjustment
- Detection device - Low air pressure、wire lack or not、punch unwell、Wire knotting
- Tool material - tungsten steel/ high speed steel
- Dimension - 900mm*600mm*1400mm（Excluding raised part）
- Weight - 250kg
-
- Max. Processing wire diameter - 6,99mm
- Min. processing wire diameter - 0,81mm
- Cutting depth - 0,01mm
- Max. stripping length - 48mm
- Max. stripping layers - 9 layers
- Drive Model - motor/ball screw driving
- Displaying - touching screen
- Blade materials - 2 pieces, imported tungsten steel.
- Clamping device automatic centralized, motor driving, clamping force control
- Capacity - 500 - 700 pcs/h (it depends on the type and length of the cable)
- Machine starting method - manual/sensitive
- Power supply - 220V, 50Hz
- Power - 380W
- Weight - 19kg
- Outer dimension - 190 x 285 x 530 mm
- Working environment - 50℃, Medium drying workshop, without vibrating working table
-
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6Mpa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43KG
-
Applicable tube diameter - ø1 - ø100 mm Applicable tube type - heat-shrink tube, ribbon cable, shielding wire, etc; It can add hot-melt cutter to process the color ribbon belt and nylon braid. Cutting length - 2 mm - 10000 mm Cutting width - 1-100 mm Cutting tolerance - 0,02 x L, ±0.2 mm Capacity - 10800 PCS/H (Depending on tube material ) Speed adjustment - 00-99 Cutter material - Tungsten steel Voltage - AC220V/50Hz Power - 170W Dimension - 350 x 250 x 320 mm Weight - 23kg -
- Applied wire diameter - AWG14-32# (0.03-2.08mm2)
- Wire type - thin wires such as PVC, solid core wire, single stranded wire, rubber wire, computer core wire, and telephone wire, etc..
- Stripping length - 1-20mm
- Diameter precision - 0,01mm Processing time about - 0,3pcs/s
- Stroke - 20mm
- Air supply - 0,5MPa-0,8Mpa
- Weight - 3,5kg
- Dimension - 260 x 150 x 270 mm
-
- Measure range - 0-1000N
- Measure mode - Manual
- Testing speed - 30~300 mm/min
- Stroke - 570mm
- Counting function - 9999 cycle
- Voltage - AC 220V
- Weight - 40 kg
- Dimension :360 x 255 x 1000 mm
-
Material - Tungsten Steel / High speed steel Compatible - Automatic terminal crimping machine -
- Wire range: 2.5 - 70mm
- Combing length: 150 mm (other size can be special ordered)
- Weight: 42 kg
- Dimension: 530 x 320 x 290mm
- Voltage: 220V/50Hz
- Power: 240W
- Speed: 3 s/pcs (adjustable)
-
- Terminal arrangement - Vertical
- Applicable mechine type - semi-automatic / full automatic terminal crimping machine
- Stroke - 40 mm
- Weight - 6,3 kg
-
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6 MPa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43 kg
-
- Application range - Electronic connecting wire, braided tube, jacket tube, motor coils, home appliances, cable, etc.
- Tie length - 60mm/80mm/100mm/120mm/150mm
- Capacity - 1500PCS/h ( Depending on products )
- Power - AC220V 50/60HZ
- Power - 100W
- Dimension - 1230 x 550 x 800 mm
- Weight - 150kg
-
- Application - suitable for AC wire, HDMI wire, network cable, PC wire, earphone wire, video wire, etc..
- Applicable wire - 1,5mm＜= OD＜=15,0mm
- Wire length - 0,6-6m
- Front length - 200mm
- Rear size - 0-200mm
- Coiling size - 0-300mm
- Middle coiling - 0-300mm
- Wire coiling shape - suitable for coiling 8-shaped wire
- Capacity - ≦1980pcs/h (Depending on the wire material )
- Voltage - 210-240V 5A
- Air supply - 0.5-0.6MPa
- Dimension - 1700 x 600 x 1600mm
- Weight - 300kg
- Function - wire cutting, wire winding and wire tying
-
- tying belt length - 75-140 mm
- tying diameter - 5-30 mm
- winding outer diameter - 50-200 mm
- winding distance - 100-200 mm
- tying speed - 0,6 time/second
- winding speed - 1-10 laps/second tying belt - encapsulated iron core
- power - AC 220 V, 60 Hz
- rate power - <200 W
- weight - 40KG
- dimension - 500 x 300 x 400 mm
-
- Wire range - 4-6mm² (Other size can be special ordered）
- Cutting length - 60-99999mm (Other size can be special ordered）
- Cutting precision - ±（0.2%*L+1）mm
- Stripping length - 0,1-18,5mm
- Feeding speed - Max. 8,0 m/s
- Crimping force - 30kN
- Voltage - 220V, 50HZ
- Air supply - 0,5 MPa-0,7 MPa，8m³/h
- Weight - 1100kg
- Dimension - 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, air pressure, bare wire and lack of terminal crimping detecting;
- Applicator range - OTP applicator, European applicator and pneumatic applicator
- It can be equipped with pressure monitoring system, monitoring the pressure during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping(it is optional)
-
- Crimping force - 40 kN
- Features - crimping machine for Junction box,
- Dimensions - 1050 x 610 x 1500mm,
- Weight - 120 kg,
-
- Capacity - 15-20 pcs/min,
- Function - automatically tighten the nut of the junction box as per the requirement,
- Air supply - 0.5 Mpa-0.7 Mpa (dry and clean air source),
- Power - AC 220 V, 50/60Hz,
- Dimension - 600 x 500 x 1200mm
-
- Power - AC 220V, 50/60 Hz,
- Function - Tightening nuts of connector to the required position,
- Capacity - 15-20 pcs/min,
- Inspecting device - The tightening distance is controlled by the distance or the torque force,
- Dimension - 500 x 400 x 280 mm,
- Weight - 50 kg.
-
- Applied range:5-30mm (other size can be special ordered)
- Application: charging cable nuts tighten
- Weight: 80kg
- Dimension:550×320×350mm
- Motor:400W
- Capacity:15-20pcs/min
-
- Connector type -According to the client's requirements
- Functions - Automatic assembly of connectors
- Precision -> 99%
- Capacity - 15 - 20 pieces per minute
-
- Applied wire - middle size coaxial cable
- Voltage - AC220V/110V, 50/60 Hz
- Motor - 600 W
- Stripping length - 0,1 mm - 90 mm
- Stripping length setting unit - 0,01 mm
- Cutting wire diameter - 3,0 - 15 mm
- Cutting depth setting unit - 0,01 mm
- Stripping method- rotary cutter
- Stripping layer - Max.9 layers
- Capacity - 400-800 pcs/h
- Dimension - 720 x 230 x 350 mm
- Weight - 40 kg
-
- Applied wire - large size coaxial cable and automotive cable ,
- Power - AC 220V / 110V, 50/60Hz,
- Motor - 800W,
- Stripping length setting unit - 0,01 mm ,
- Cutting wire diameter - 3,0-25 mm,
- Cutting depth setting unit - 0,01 mm,
- Stripping method - rotary cutter,
- Stripping layer - Max.9 layers ,
- Capacity - 300-800 pcs/h ,
- Dimension 1000 x 225 x 400 mm,
- Weight 50 kg,
-
- Diameter of the wire - ø0,64 mm - ø4,0 mm
- Funkcje - Automatic coaxial cable cutting and stripping (9 layers)
- Dimensions - 800 x 700 x 440 mm
- Weight - 100 kg
-
- Diameter of the wire - ø1,0 - ø5,5 mm
- Funkcje - Automatic coaxial cable cutting and stripping (9 layers)
- Dimensions - 800 x 700 x 440 mm
- Weight - 100 kg
-
- Cutting diameter - 1-200 mm
- Features - Cutting of cable tubes
- Dimension - 350 x 250 x 320 mm
- Weight - 65 kg
-
- Tube diameter range - ø5- ø35 mm
- Features - corrugated tube cutting
- Dimension - 560 x 440 x 400mm
- Weight - 72 kg
-
- Stripping diameter - ø0,75 mm² to ø95 mm²,
- Functions - wire stripping,
- Dimension - 350 x 300 x 400mm
- Weight - 20 kg.
-
- Stripping diameter - max. ø7 mm,
- Functions - wire stripping,
- Dimension - 400 x 300 x 270 mm,
- Weight - 20 kg.
-
- Stripping diameter - max. ø15 mm,
- Functions - wire stripping,
- Dimension - 480 x 330 x 280mm
- Weight - 45 kg.
-
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension - 600 x 420 x 360mm
- Weight - 30 kg
-
- Stripping diameter - max. ø30 mm,
- Functions - wire stripping,
- Dimension - 615 x 425 x 375mm
- Weight - 40 kg
-
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension 950 x 350 x 280 mm,
- Weight 45 kg.
-
- Stripping diameter - ⌀10 mm - ⌀50 mm
- Control system - PLC control with touch screen
- Functions - Removing the insulation
- Dimensions - 1400 x 330 x 420mm
- Weight - 110 Kg
-
- Stripping range : 0,1 - 2,5mm²(AWG13#-AWG28#)
- Applied wire type: computer core wire, shielding wire, telephone wire, flat wire, etc.
- Stripping length : 20mm
- Stroke: 20mm
- Air supply: 0,5MPa - 0,7 Mpa
- Weight : 9,5 kg
- Voltage: AC110V/220V 50/60Hz
- Dimension : 260 x 150 x 270 mm
-
- Stripping capacity and specification 1-10 pieces/ time, AWG#18-#32
- Air pressure 4- 7,5kg
- Weight 15kg
- Min. cutting length 2,5mm
- Stripping and stripping length 2,5 - 25 mm
- Power 90 W
- Max. cutting length 25 mm
- Stripping capacity 120-30 times/minute, adjustable
- Power supply 220V/ 50Hz
- Stripping range 0,1 - 0,75 mm2
- Outer dimension 320 x 230 x 300 mm
-
- Measurement range - 0 - 5000N
- Functions - Measurement of breaking force, aging
- Dimensions - 410 x 260 x 1000 mm
- Weight - 75 kg
-
- Material of the cable tray: wooden or plastic
- Cable tray outer diameter range：800 - 1200 mm.
- Cable tray inner diameter：80mm（other size can be special ordered）
- Bearing weight range：0-2000㎏
- Feeding speed: adjustable
- Motor power：5.5kw
- Power： 380V 50Hz
- Weight：About 400KG
- Dimension ：4000 x 1700 x 1800 mm
-
- Cross secrion: 2,5 mm² - 10 mm² (other sizes on request)
- Wire feeding speed max. 6m/s
- Capacity 7,6 (duble end)
- Power AC 220 V 50 Hz
- Air supply 0,6 MPa
- Weiight 240 kg
- Dimension 2350 x 720 x 1400 mm
-
Dimension : 400 x 400 x 400 mm Weight : 6kg -
- Material : Stainless steel machine case，IP54
- Spray tube length:2,5 m，diameter : 20mm
- Dimension: 550x300x320 mm
- Nozzle size：185,5x43x49mm
- Weight: 33kg
- Voltage：110-220V AC 50/60HZ
- Working environment temperature: 5-45°C (35-100°F)
- Working environment humidity: Maximum 90%, no condensation.
-
- Voltage : 220V 5 0Hz
- Temperature range: 1-100°C
- Dimension : 500 x 500 x 600 mm
- Weight : 10kg
-
- Range：ɸ 6~8mm
- Precision：±0.2mm
- Speed：500 - 1000PCS/H （Depending on the speed of the operator）
- Power：AC 220V/50 Hz
- Air supply：0,6 - 0,7 Mpa
- Motor：450W
- Dimension：610 X 500 X 1104 mm
- Weight：95KG
-
- Feeding mode - horizontal
- Shut height - 135,78 mm
- Feeding - Max. 40 mm
- Terminal thickness Max. 1,2 mm
- Applicable wire diameter 0,08-6 mm2 (9-30AWG)
- Feeding structure pneumatic
- Weight 6 kg
- Dimension 180 x 155 x 110 mm
- Stroke 40/30 mm
- Application Semi-automatic / Full automatic terminal crimping machine
-
- Feeding mode: vertical
- Shut height : 135,78 mm
- Feeding : 40 mm Max
- Terminal thickness: Max. 1.2 mm
- Applicable wire diameter: 0,08-6 mm2 (9-30AWG)
- Feeding structure: pneumatic
- Weight : 6kg
- Dimension: 312 x 155 x 106 mm
- Stroke: 40 / 30 mm
- Application : Semi-automatic / Full automatic terminal crimping machine
-
- Terminal arrangement - Horizontal
- Application - Semi - automatic / Full - automatic terminal crimping machine
- Stroke - 30mm
- Weight - 4,4 kg
-
- Terminal arrangement - Vertical
- Application - Semi - automatic / Full - automatic terminal crimping machine
- Stroke - 30mm
- Weight - 4,4 kg
-
- Terminal arragement - horizontal / vertical
- Application - Semi - automatic terminal crimping
- Stroke - 30 mm
- Weight - 6.3Kg
-
- Terminal arragement - horizontal / vertical
- Application - Semi - automatic terminal crimping
- Stroke - 30 mm
- Weight - 6.3Kg
-
- Terminal arrangement - Vertical
- Application - Półautomatyczne urządzenia do zagniatania terminali
- Stroke - 30mm
- Weight - 4.4Kg
-
- Weight - 2,5 kg
- Max Feeding capacity - 25 mm
- Sliding distance - 30mm
-
Mostly used for terminal crimping of aviation plug. Crimping on the four edges of terminal to make better contact between conductor wire and terminal. Exquisite in structure design, evenness crimping force and excellent finished shape of terminal crimping .- Wire diameter range - 0.05-10mm2
- Shut height - 135.8mm
- Stroke 40mm
- Applicable machine type - Semi-automatic terminal crimping machine
- Dimension 185 x 165 x 160 mm
- Weight 8kg
-
Suitable for different wire diameter. Suitable for different model of PV junction box. Applicable machine type : BZW-4T-C Mute terminal crimping machine Shut height : 125mm Stroke : 30-40mm Weight :10kg Dimension : 130 x 130 x 150mm -
- Material - DC53 steel
- Application - Terminal crimping devices
-
- Material - DC53 steel.
- Application - Devices for crimping terminals
-
- Material - Tungsten steel / High-speed steel
- Application - Wire processing machines
-
- Material - DC53 steel
- Application - BZW-07 press for brass cable terminals
