- Wire size: 0,1 - 2,5mm² (AWG12-36) (special size could be ordered)
- Pre-feeding device: servo motor (it is optional)
- Capacity: 4000 - 4200 pcs/hour (the length of each piece is less than 100mm)
- Function: double ends for wire striping and crimping, single end for semi stripping, single end for crimping.
- The adjusting method for blade: microprocessor controlled system + high precision stepping motor driving.
- Cutting length: 35 - 100000 mm (special length could be order)
- Cutting precision: adjusting range 0,5mm + cutting length * 0,5% below
- Stripping length: 1-10mm (special length could be ordered)
- Equipped die: OTP horizontal die, straight die, European style die, Korean die and etc.
- Crimping machine: frequency conversion mute crimping machine
- Control: PLC, touching screen.
- Inspecting items: inspection for wire tangle, defective wire, pre-feeding, wire crimping, and air pressure.
- Power supply: AC 230V/110V 50/60Hz
- Compressed air: 0,5 MPa about 140 N/min
- Outer dimension: 700 x 800 x1500 mm
- Weight: about 300kg
-
-
- Tube diameter range - ø5- ø35 mm
- Features - corrugated tube cutting
- Dimension - 560 x 440 x 400mm
- Weight - 72 kg
-
- Wire range: 10-120 mm² (AWG6#-AWG0000#),
- Crimping force: 160 kN,
- Rated power: 7,5 kW,
- Average power:3,5 kW
- Power: 380 V / 50 Hz, three phase
- Dimension: 900 x 1000 x 2000 mm
- Weight: 900 kg
- Stroke: 40 mm (50 mm is optional)
-
- Measure range - 0-1000N
- Measure mode - Manual
- Testing speed - 30~300 mm/min
- Stroke - 570mm
- Counting function - 9999 cycle
- Voltage - AC 220V
- Weight - 40 kg
- Dimension :360 x 255 x 1000 mm
-
Applicable tube diameter - ø1 - ø100 mm Applicable tube type - heat-shrink tube, ribbon cable, shielding wire, etc; It can add hot-melt cutter to process the color ribbon belt and nylon braid. Cutting length - 2 mm - 10000 mm Cutting width - 1-100 mm Cutting tolerance - 0,02 x L, ±0.2 mm Capacity - 10800 PCS/H (Depending on tube material ) Speed adjustment - 00-99 Cutter material - Tungsten steel Voltage - AC220V/50Hz Power - 170W Dimension - 350 x 250 x 320 mm Weight - 23kg -
- Application range - Electronic connecting wire, braided tube, jacket tube, motor coils, home appliances, cable, etc.
- Tie length - 60mm/80mm/100mm/120mm/150mm
- Capacity - 1500PCS/h ( Depending on products )
- Power - AC220V 50/60HZ
- Power - 100W
- Dimension - 1230 x 550 x 800 mm
- Weight - 150kg
-
- Wire range 0,1 - 2,5 mm² (AWG23-AWG13) (Other size can be special ordered）
- Cutting length 35 mm~100000 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Twisting length 4 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6,0 m/s
- Capacity 4500 - 5000 pcs/h (within length 100mm)
- Crimping force 20 kN
- Voltage 230V 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa - 0,7 MPa，6m³/h
- Weight 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping, single end twisting
- Detecting ability wire knotting, wire lacking, terminal lacking and air pressure detecting
- Applicator range Stroke 30 mm (40 mm stoke can be special ordered)
-
Wire range 0,3 - 2,5mm² (AWG13-AWG23) (Other size can be special ordered） Cutting length 35 mm~6500 mm (Other size can be special ordered） Cutting precision ±（0.2%*L+1）mm Stripping length 0,1 - 10 mm (Other size can be special ordered） Feeding speed Max.6.0 m/s Capacity 5000 - 5500 pcs/h (within length 100mm) Crimping force 20kN Voltage 230V, 50Hz Motor 0,75 kW Air supply 0,5 MPa-0,7 MPa，6m³/h Weight about 200 kg Dimension 650 x 700 x 1500 mm Function - single end half stripping, single end crimping -
- Crimping force: 15KN
- Capacity : 250 pcs / min
- Average electric consumption rate : 0.35KW
- Motor : 0.55KW
- Voltage : AC220V , 50Hz
- Stroke : 23mm
- Air supply : 0.5 Mpa-0.7 Mpa
- Dimension: 300 x 350 x 580mm
- Weight : 50kg
- Copper belt size : 2mm/4mm/6mm
- Feeding mode : By mechanical feeding
- Application : Connection between neon lamp and resistance, connection among wires, connection between slide switch and wire, and connection among thermal sensors such as magnetic reed switch and temperature fuse.
-
Suitable for different wire diameter. Suitable for different model of PV junction box. Applicable machine type : BZW-4T-C Mute terminal crimping machine Shut height : 125mm Stroke : 30-40mm Weight :10kg Dimension : 130 x 130 x 150mm -
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension 950 x 350 x 280 mm,
- Weight 45 kg.
-
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension - 600 x 420 x 360mm
- Weight - 30 kg
-
- Stripping diameter - max. ø7 mm,
- Functions - wire stripping,
- Dimension - 400 x 300 x 270 mm,
- Weight - 20 kg.
-
- Crimping force - 40 kN
- Features - crimping machine for Junction box,
- Dimensions - 1050 x 610 x 1500mm,
- Weight - 120 kg,
-
- Material - DC53 steel
- Application - BZW-07 press for brass cable terminals
-
- Cable Type - 28AWG ~ 18AWG for a single cable; 28AWG ~ 22AWG for a ribbon cable,
- Features - Unwinding of wires,
- Dimensions - 1200 x 700 x 1040mm,
- Weight - 120kg.
-
The BZW-886D machine is designed for stripping coaxial cables. The machine is characterized by high efficiency and a wide stripping range from 0.1 mm to 200 mm. Powered by 230V AC. The BZW-886D allows for stripping up to 9 layers. Stripping is performed using rotary blades which ensures very high precision and speed of operation. -
- Wire range 0,3 - 6 mm² (AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60 - 10000 mm (Other size can be special ordered）
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1 - 18 mm
- Feeding speed Max. 8,0 m/s
- Crimping force 30 kN
- Power 230V 50Hz
- Air supply 0,5 MPa - 0,7 MPa，8m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and terminal crimping lacking;
- Applicator range OTP applicator, European applicator and pneumatic applicator;
- It can be installed with CFM, monitoring the crimping quality during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, single end heat shrink tubing/jacketing inserting.
-
- Wire range 0,3-6 mm²(AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60-10000mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0.1-18mm
- Feeding speed Max. 8m/s
- Crimping force 30kN
- Power 220V 50HZ
- Air supply 0,5 MPa - 0,7 MPa，8 m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire , terminal crimping lacking and soldering temperature;
- Applicator range OTP applicator, European applicator and pneumatic applicator; It can be installed with CFM. monitoring the crimping quality during the whole processing and 100% traceability.
- Function automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, one end twisting and tinning, another end terminal crimping and seal inserting;
-
BZW-3.0 C C PM 4M is upgrade of automatic high precise double ends terminal crimping machine. Mainly for power, automotive, new energy industry wire hamess preocessing. BZW-3.0 C C PM 4M can realize long wire cuttin, wire stripping, marking, waterproof seal inserting and double ends terminal crimping at the same time. -
Cross section: 0,3 - 5 mm² (Other size can be special ordered) Cutting length: 60-10000mm (Other size can be special ordered) Cutting precision: ±(0.2%*L+1)mm Stripping length: 0,1 - 18 mm Feeding speed: Max. 8,0 m/s Wire collecting conveyor: 2 m, 4 m (Other size can be special ordered) Crimping force: 30 kN Power: 220V 50Hz Air supply: 0,5 MPa - 0,7 MPa, 8m³/h Weight: 1100kg Dimension: 3500 x 1200 x 1700 mm Detecting ability: wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and seal detecting. Applicator range: stroke is 30 and 40 mm . -
- Terminal arrangement - Vertical
- Applicable mechine type - semi-automatic / full automatic terminal crimping machine
- Stroke - 40 mm
- Weight - 6,3 kg
-
- Specification - 310 x 270 x 710 mm
- Crimping force - 40 kN
- Weight- 58 kg
- Average power consumption - 0,85kw
- Motor power - 1,5 kw
- Power - 220v 50Hz
- Stroke - 30mm (40mm could be ordered)
-
- Crimping width - 7mm (Can be special ordered)
- Crimping terminal size - ≤2.5mm²
- Dimension - 360*550*680mm
- Weight - 106kg
-
- Crimping force - 25kN
- Rated power - 0,75kW
- Average consumption - 0,45kW
- Power - 220V/50Hz
- Dimension - 360 x 550 x 680 mm
- Weight - 98 kg
- Stroke - 30 mm/40 mm
-
- Applied wire - middle size coaxial cable
- Voltage - AC220V/110V, 50/60 Hz
- Motor - 600 W
- Stripping length - 0,1 mm - 90 mm
- Stripping length setting unit - 0,01 mm
- Cutting wire diameter - 3,0 - 15 mm
- Cutting depth setting unit - 0,01 mm
- Stripping method- rotary cutter
- Stripping layer - Max.9 layers
- Capacity - 400-800 pcs/h
- Dimension - 720 x 230 x 350 mm
- Weight - 40 kg
-
Wire Type - 1-25mm2 (AWG3 # -18 #) Features - Cutting, skinning, half-skinning Number of layers - Max 1 Dimensions - 420 x 297 x 345mm Weight - 33 Kg -
- tying belt length - 75-140 mm
- tying diameter - 5-30 mm
- winding outer diameter - 50-200 mm
- winding distance - 100-200 mm
- tying speed - 0,6 time/second
- winding speed - 1-10 laps/second tying belt - encapsulated iron core
- power - AC 220 V, 60 Hz
- rate power - <200 W
- weight - 40KG
- dimension - 500 x 300 x 400 mm
-
The presented set allows for cutting, stripping, and marking wires. A set consisting of:- automatic wire cutting and stripping machine BZW-882DJ
- wire printer ITS-PRV380P-W
-
- Applied wire diameter - AWG14-32# (0.03-2.08mm2)
- Wire type - thin wires such as PVC, solid core wire, single stranded wire, rubber wire, computer core wire, and telephone wire, etc..
- Stripping length - 1-20mm
- Diameter precision - 0,01mm Processing time about - 0,3pcs/s
- Stroke - 20mm
- Air supply - 0,5MPa-0,8Mpa
- Weight - 3,5kg
- Dimension - 260 x 150 x 270 mm
-
- Cutting length: 1 mm - 99999 mm
- Middle stripping: 4 stripping positions in the middle.
- Cutting tolerance: 0,002 x L mm (within) x L= cutting length
- Stripping length: wire head: 0 - 30mm, wire end: 0 - 15mm
- Applicable wire core area: 0,1- 6,0 mm² (AWG 30#-10#)
- Applicable wire: plastic, PVC, Teflon, glass materials wire.
- Max. Guide bushing diameter: 10
- Blade materials: hard tungsten steel (long service time)
- Stripping capacity per hour: within length 100 mm, 7000 - 3000 pieces
- Output speed: Express
- Wire outer diameter adjustment: needed
- Stripping quality: excellent
- Wheel clamping force adjustment: have
- Speed adjusting rates: 0 - 9
- Stripping pressure adjustment: adjustable
- Drive: 4 Wheels driving
- Feedback from customer: extremely good
- Outer dimension: 420 x 340 x 280 mm
- Weight: 28 kg
- Power supply: AC220V/50Hz (optional AC110V/60Hz)
- Power: 200 W
-
- Applied range:5-30mm (other size can be special ordered)
- Application: charging cable nuts tighten
- Weight: 80kg
- Dimension:550×320×350mm
- Motor:400W
- Capacity:15-20pcs/min
-
- Power - AC 220V, 50/60 Hz,
- Function - Tightening nuts of connector to the required position,
- Capacity - 15-20 pcs/min,
- Inspecting device - The tightening distance is controlled by the distance or the torque force,
- Dimension - 500 x 400 x 280 mm,
- Weight - 50 kg.
-
This machine is mainly applicable to new energy high-voltage lines, which can complete thefunctions of high-voltage wire stripping, aluminum foil removal, shield net cutting, and internainsulation stripping at the same time; each function can be used independently. Features of BZW-G5001S:- wire jacket stripping
- foil removing、
- shield net cutting
- peel off the internal insulation
- shield net flip
-
This machine is mainly applicable to new energy high-voltage lines, which can complete thefunctions of high-voltage wire stripping, aluminum foil removal, shield net cutting, and internainsulation stripping at the same time; each function can be used independently. BZW-G5001 features:- wire jacket stripping
- foil removing、
- shield net cutting
- peel off the internal insulation
- shield net flip
