- odvinování,
- vázání,
- omotávání a navinování.
- zkoušky hotových výrobků,
Vše, co potřebujete k výrobě kabelových svazků. Seznamte se s naší nabídkou strojů a zařízení na zpracování vodičů.
-
- Terminal arragement - horizontal / vertical
- Application - Semi - automatic terminal crimping
- Stroke - 30 mm
- Weight - 6.3Kg
-
- Terminal arragement - horizontal / vertical
- Application - Semi - automatic terminal crimping
- Stroke - 30 mm
- Weight - 6.3Kg
-
- Terminal arrangement - Vertical
- Application - Półautomatyczne urządzenia do zagniatania terminali
- Stroke - 30mm
- Weight - 4.4Kg
-
- Průměr řezu - 5 - 35mm
- Funkce - Řezání kabelových trubek
- Rozměry - 560 x 440 x 400mm
- Váha - 72kg
-
Automatický stroj BZW-886D je určen pro odizolovávání koaxiálních kabelů. Tento stroj se vyznačuje vysokou efektivitou a širokým rozsahem odizolování od 0,1 mm do 200 mm. Je napájen napětím 230V AC. BZW-886D umožňuje odizolování až 9 vrstev. Odizolování probíhá pomocí rotačních nožů, což zajišťuje velmi vysokou přesnost a rychlost operace. -
- Capacity - 15-20 pcs/min,
- Function - automatically tighten the nut of the junction box as per the requirement,
- Air supply - 0.5 MPa-0.7 MPa (dry and clean air source),
- Power - AC 220 V, 50/60Hz,
- Dimension - 600 x 500 x 1200mm
-
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6Mpa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43KG
-
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6 MPa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43 kg
-
- Cutting diameter - 1-200 mm
- Features - Cutting of cable tubes
- Dimension - 350 x 250 x 320 mm
- Weight - 65 kg
-
- Applicable tube diameter - ø1 - ø100 mm
- Applicable tube type - heat-shrink tube, ribbon cable, shielding wire, etc;
- It can add hot-melt cutter to process the color ribbon belt and nylon braid.
- Cutting length - 2 mm - 10000 mm
- Cutting width - 1-100 mm
- Cutting tolerance - 0,02 x L, ±0.2 mm
- Capacity - 10800 PCS/H (Depending on tube material )
- Speed adjustment - 00-99
- Cutter material - Tungsten steel
- Voltage - AC220V/50Hz
- Power - 170W
- Dimension - 350 x 250 x 320 mm
- Weight - 23kg
-
- Cutting length: 1 mm - 99999 mm
- Middle stripping: 4 stripping positions in the middle.
- Cutting tolerance: 0,002 x L mm (within) x L= cutting length
- Stripping length: wire head: 0 - 30mm, wire end: 0 - 15mm
- Applicable wire core area: 0,1- 6,0 mm² (AWG 30#-10#)
- Applicable wire: plastic, PVC, Teflon, glass materials wire.
- Max. Guide bushing diameter: 10
- Blade materials: hard tungsten steel (long service time)
- Stripping capacity per hour: within length 100 mm, 7000 - 3000 pieces
- Output speed: Express
- Wire outer diameter adjustment: needed
- Stripping quality: excellent
- Wheel clamping force adjustment: have
- Speed adjusting rates: 0 - 9
- Stripping pressure adjustment: adjustable
- Drive: 4 Wheels driving
- Feedback from customer: extremely good
- Outer dimension: 420 x 340 x 280 mm
- Weight: 28 kg
- Power supply: AC220V/50Hz (optional AC110V/60Hz)
- Power: 200 W
-
- Type Coaxial cable stripping machine
- Stripping range 6 - 120 mm²
- Cutting length 240 - 99999,99 mm
- Cutting precision 0.2% mm
- Stripping length wire head 1-260 mm,wire end 1-120 mm
- Drive 8 wheels independently servo driven
- Capacity 500-900 pcs/h (it depends on the length of the wire)
- Voltage 230 V, 50 Hz
- Motor 2,3 kW
- Stored programs 0 - 99 kinds of processing data
- Tool materials Imported high speed steel
- Nozzle diameter ø 6-28 mm
- Press wheel setting Motor drive, digital control of crimping force
- Stripping layer 3 layer
- Weight 470 kg
- Dimension 1300 x 800 x 1330 mm
-
- Outer diameter Ø 2-14mm
- Stripping range 4-25mm2
- Cutting length 0,1-100000 mm
- Cutting precision ±（0,2+0,002*L）mm
- Drive Belt conveyor , 8 wheels independently servo driven
- Stripping type Rotary and stripping cutter
- Stripping length wire head 0,1-200mm, wire end 0.1-100mm
- Tool materials Imported high speed steel and import tungsten steel
- Stripping speed 450 - 650pcs/h
- Power AC220V/110V 50/60Hz
- Motor 0,75 kW
- Air pressure 0,4 - 0,6MPa
- Weight 298kg
- Dimension 1100*615*1270 mm
- Display mode touch screen
- Display interface 10 Inch Touch screen with English and Chinese system
-
- Wire range - 4 - 70 mm²
- Stripping layers - max. 3
- Middle striping capacity - 40 sections
- Dimension - 945 x 615 x 1270 mm
- Weight - 250 kg
-
- Stripping range: 4-50 mm²
- Stripping Length: 1-200mm(wire head), 1-100mm(wire end)
- Feeding Speed: Max. 6,0 m/s
- Max. stripping diameter: 16 mm
- Capacity: 1000-5000 pcs/h
- Power: 220V, 50Hz, 0,3 kw
- Air Supply: 0,2 - 0,6 MPa
- Weight: 115kg
- Dimension: 1200 x 630 x 430mm
- Stored program: 0 - 99 kinds of processing data.
- Stripping layer: 3 layers
-
- Wire range 0,1 - 2,5 mm² *2 wires
- Cutting length 10 - 99999mm
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1-30mm (Other size can be special ordered）
- Capacity - 6000 - 15000 pcs/h
- Tool materials Imported tungsten steel and high speed steel
- Drive 4 wheels driven
- Feeding speed - 2m/s
- Voltage - 230V 50HZ
- Power - 0,3KW
- Weight - 30kg
- Dimension - 420 x 340 x 280 mm
-
- Inner core cross section 2x0,1 - 2x,5 mm²
- Cutting precision ±（0.2%*L+1）mm
- Stripping length sheath（wire head 0,1-200 mm , wire end 0,1-150 mm）
- Inner core （wire head 0,1-100 mm , wire end 0,1-100 mm）
- Capacity 1000-3000 pcs/h
- Tool materials Imported tungsten steel and high speed steel
- Drive 4 wheels driven
- Feeding speed 0,7 m/s
- Voltage 230V 50 Hz
- Motor 0,3 kW
- Air supply 0,4 MPa-0,6 MPa
- Weight 31kg
- Dimension 420 x 297 x 345 mm
-
- Stripping range 4 - 50 mm²
- Cutting length 0,1 - 99999,99 mm
- Cutting precision 0,2%mm
- Stripping length wire head 1 - 200 mm, wire end 1 - 100 mm
- Capacity 1000 - 15000 pcs/h (it depends on the length of the wire)
- Power 220V, 50Hz
- Motor 0,3 kW
- Stored programs 0 - 99 kinds of processing data
- Tool materials Imported high speed steel
- Tube diameter ø 6 - 18 mm
- Max. stripping diameter 16 mm
- Air supply 0,2-0,6 MPa
- Stripping layer 3 layer
- Weight 105 kg
- Dimension 800 x 650 x 45 0mm
-
- Stripping range: 4 - 25 mm²
- Stripping length: 1-200mm(wire head), 1-100mm(wire end)
- Winding length: 4 - 20m
- Winding diameter: 3-8 mm
- Capacity: 1000-1200 pcs/h
- Power: 220V, 50HZ, 0,3 KW
- Air Supply: 0,4-0,6 MPa
- Weight: 470 kg
- Drive 8 wheels servo motor driven
- Dimension: 800 x 650 x 450 mm
- Stored program: 0-99 kinds of processing data.
- Stripping layer: 3 layers
-
- Stripping range: 0,1-6 mm²
- Cutting length: 0,1-99999,99mm
- Stripping Length: 0,1 - 30 mm (other size can be special ordered)
- Drive: 4 wheels driven
- Nozzle diameter: 3 - 8 mm
- Capacity: 3600 pcs/h (50 mm)
- Power: 230V, 50HZ, 0,3 kW
- Stored programs: 0 - 99 kinds of processing data
- Tool materials: Imported high speed steel
- Cutter High speed steel
- Air supply: 0,2 - 0,6 MPa
- Stripping layer: 3 layers
- Dimension: 480 x 400 x 320 mm
- Weight: 40 kg
-
- Wire range 0,1 - 2,5 mm2 （AWG13#-AWG28#） *Multi core
- Wire diameter less than Φ12 mm
- Cutting length 0,1 - 99999 mm
- Cutting precision ±（0.2%*L+1）mm
- Stripping length
- Wire head 0,1 - 200 mm wire end 0,1 - 150 mm (other size can be special ordered）
- Capacity 1000 - 5000 pcs/h
- Tool materials Imported tungsten steel and high speed steel
- Drive 4 wheels driven
- Feeding speed 1m/s Voltage 220 V, 50 Hz
- Power 0,35 kW
- Air supply 0,3 MPa-0,5 MPa
- Weight 31kg
- Dimension 420 x 297 x 345 mm
-
- Wire Type - 1-25mm2 (AWG3 # -18 #)
- Features - Cutting, skinning, half-skinning
- Number of layers - Max 1
- Dimensions - 420 x 297 x 345mm
- Weight - 33 Kg
-
- Stripping range 6 - 120 mm²
- Cutting length 10 - 99999,99 mm
- Cutting precision ≤0.2%mm
- Stripping length - wire head 1 - 260 mm, wire end 1 - 120 mm
- Drive 8 wheels independently servo driven
- Capacity 500-900 pcs/h (it depends on the length of the wire)
- Power 230V, 50 Hz
- Motor 2,3 kW
- Stored procedure 0 - 99 kinds of processing data
- Tool materials Imported high speed steel
- Nozzle diameter ø 6-28 mm
- Press wheel setting Motor drive, digital control of crimping force
- Stripping layer 3 layer
- Weight 445kg
- Dimension 1300 x 800 x 1330 mm
-
- Stripping range 16 - 240 mm²
- Cutting length 10 - 99999,99mm
- Cutting precision ≤0.2%mm
- Stripping length wire head 1 - 600mm, wire end 1 - 280mm
- Drive 8 wheels independently servo driven
- Tool materials Imported high speed steel
- Feeding speed 0,8m/s
- Capacity 500-800 pcs/h (it depends on the length of the wire)
- Power 230V, 50Hz
- Motor 0,75KW
- Air supply 0,2-0,6 MPa
- Weight 600 kg
- Dimension 1600 x 810 x 1360 mm
-
- Applied wire type Multi-core round and flat sheathed cable
- Diameter Ø 2-14（other size can be special ordered）
- Inner core 1-5 piece
- Cutting length 0,1-100000mm
- Cutting precision ±（0.2+0.002*L）mm
- Drive Belt conveyor, 8 wheels independently servo driven
- Outer stripping length wire head 0,1 - 200 mm, wire end 0,1 - 100 mm
- Inner stripping length wire head 0,1 - 30 mm, wire end 0,1 - 30 mm
- Power AC220V/110V, 50/60 Hz
- Motor 0,75 kW
- Air pressure 0,4-0,6 MPa
- Weight 247 kg
- Dimension 945 x 615 x 1270 mm
- Display mode Touch screen
- Display interface 10 Inch Touch screen，with English system
-
- Wire range - within 20pin, AWG28#：1-20pin； AWG26#：1-15pin； AWG24#：1-12pin
- Cutting length - 30 - 99999 mm
- Dividing length - 1 - 200 mm
- Cutting precision - ±（0,2%*L+1）mm
- Stripping length - wire head 0,1-30mm , wire end 0,1-30 mm
- Capacity - 1000-3000 pcs/h
- Tool materials - Imported tungsten steel and high speed steel
- Drive: 4 wheels driven
- Feeding speed: 0,7m/s
- Power - 220V 50HZ
- Motor - 0,3KW
- Air supply - 0,3MPa - 0,5 MPa
- Weight - 31kg
- Dimension - 460×297×345 mm
-
- Outer dimension: 420 x 580 x 320 mm
- Weight: 35 kg
- Display: 128 x 80 Blue LCD
- Power supply: AC215-235V ≦50/Hz
- Power: 120 - 250 W
- Cutting length: 1mm-99999,9mm
- Middle stripping: 13 stripping positions in the middle.
- Stripping length: Stripping head: 0,1 - 30mm, stripping end: 0,1 - 30mm
- Applicable wire core area: 0.1-2.0mm2 *2 (AWG11#-28#)*2
- Cutting tolerance: 0,002 x L mm (within) x L= cutting length
- Twisting range: AWG11#-28# (double line)
- Twisting length: 0-30mm
- Max. Guide bushing diameter: 1,5-5mm
- Blade materials: imported high speed steel, tungsten steel
- Drive: 4 Wheels driving
- Stripping capacity per hour: 4000-10000 pieces
- Wire pressure adjustment: have
- Pulse equivalent: no error within 1 m.
- Program: it can storage 200 programs; it doesn’t need to reset parameters while changing the different wire.
- Total: 999999 pieces
- Batch: 99999 pieces
- Blade motor precision: 0,03mm
- Precision for inlet and outlet motor: mute mixed stepping motor, each step is about 0,1mm
- Remarked function: automatic pre-feeding and discharging, time sets for automatic starting, exclusive striping and discharging the wire. The program 96 is for processing the super short wire.
- The shortest twisting function: the wire could be twisted while the middle part of the wire skin length remains 26mm.
-
- Power - AC 220V, 50/60 Hz,
- Function - Tightening nuts of connector to the required position,
- Capacity - 15-20 pcs/min,
- Inspecting device - The tightening distance is controlled by the distance or the torque force,
- Dimension - 500 x 400 x 280 mm,
- Weight - 50 kg.
-
BZW-886+Q1 Automatic coaxial cable cutting and stripping machine mostly processing the communication cable(small cable) by automatically cutting, two ends multi-layers stripping without damaging the conductor; Rotary tool is combined with V shape tool, high precision, fast speed and good stability; Special axis positioning device and rotary tools can strip max. 9 layers without changing the tools for processing different dimensions of wires; Wire clamping device: automatic centralizing, motor driving and clamping force are controlled by program -
BZW-886+Q2 Automatic coaxial cable cutting and stripping machine mostly processing the communication cable(large cable) by automatically cutting, two ends multi-layers stripping without damaging the conductor; Rotary tool is combined with V shape tool, high precision, fast speed and good stability. Special axis positioning device and rotary tools can strip max. 9 layers without changing the tools for processing different dimensions of wires. Wire clamping device: automatic centralizing, motor driving and clamping force are controlled by program. -
- Power - AC 220V, 50/60Hz Single phase
- Function - Wire cutting、single end strip、double end strip、single end half strip、double end half strip、single end twisting、single end crimping，single end tinning
- Cutting length - 30mm-99999.9mm
- Stripping length - Wire head：0,1mm-7mm
- Twisting length - 3mm - 7mm
- Tube diameter - ɸ 1.5mm-5mm
- Cross section - AWG#16-AWG#32
- Crimping force - 2.0T
- Working speed - 4000-5000pcs/hour
- Crimping position - Digital adjustment
- Detection device - Low air pressure、wire lack or not、punch unwell、Wire knotting
- Tool material - tungsten steel/ high speed steel
- Dimension - 900mm*600mm*1400mm（Excluding raised part）
- Weight - 250kg
-
- Wire range - 4-6mm² (Other size can be special ordered）
- Cutting length - 60-99999mm (Other size can be special ordered）
- Cutting precision - ±（0.2%*L+1）mm
- Stripping length - 0,1-18,5mm
- Feeding speed - Max. 8,0 m/s
- Crimping force - 30kN
- Voltage - 220V, 50HZ
- Air supply - 0,5 MPa-0,7 MPa，8m³/h
- Weight - 1100kg
- Dimension - 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, air pressure, bare wire and lack of terminal crimping detecting;
- Applicator range - OTP applicator, European applicator and pneumatic applicator
- It can be equipped with pressure monitoring system, monitoring the pressure during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping(it is optional)
-
- Application - suitable for AC wire, HDMI wire, network cable, PC wire, earphone wire, video wire, etc..
- Applicable wire - 1,5mm＜= OD＜=15,0mm
- Wire length - 0,6-6m
- Front length - 200mm
- Rear size - 0-200mm
- Coiling size - 0-300mm
- Middle coiling - 0-300mm
- Wire coiling shape - suitable for coiling 8-shaped wire
- Capacity - ≦1980pcs/h (Depending on the wire material )
- Voltage - 210-240V 5A
- Air supply - 0.5-0.6MPa
- Dimension - 1700 x 600 x 1600mm
- Weight - 300kg
- Function - wire cutting, wire winding and wire tying
-
BZW-FX8060 Automatický odvíječ drátů s velkým průměrem. -
Automatický stroj BZW-2.0X má funkci stříhání kabelu, odstraňování izolace a lisování terminálů. Výjimečný vzhled a kompaktní konstrukce, úspora místa a moderní vzhled. Jednoduchá a rychlá výměna náhradních dílů, plná digitální diagnostika a snadná údržba. -
Prezentovaná sada umožňuje stříhání, odlupování a označování kabelů. Sada se skládá z:- Automatický stroj na stříhání a izolaci kabelů BZW-882DJ.
- Tiskárna na kabely ITS-PRV380P-W.
-
Dva kabely mohou být zpracovávány současně a dosahuje se vysoké pracovní účinnosti. Řízení počítačem, ovládání tlačítky, stabilní pracovní výkon a snadná obsluha. Rychlost podávání, střihu a odizolování kabelu lze nastavit samostatně, aby se dosáhlo nejlepšího účinku zpracování. Má funkci nastavení celkového počtu, počtu balíčků, časového zpoždění, střihu středu atd. Řadič motoru využívající metodu dělení s vysokou přesností a dlouhou životností. V paměti BZW-882D2 lze uložit až 100 nastavení zpracování kabelů.
-
1. Počítačové ovládání, dotykový displej, servomotor, snadné ovládání. 2. Rychlost podávání kabelu, střihu kabelu a odstraňování izolace lze nastavit nezávisle, aby dosáhly nejlepšího efektu odstraňování izolace. 3. Má funkci nastavení celkového množství, počtu svazků, zpoždění času atd. 4. Motorový pohon využívající metodu dělení, s vysokou přesností a dlouhou životností. 5. V systému lze uložit 100 sad nastavení. -
Polootomatizovaná linka BZW-6.0FK01 je hlavně používána pro zpracování kabelů Fakra. Stroj je vyroben v modulárním stylu, vyznačuje se stabilním výkonem a vysokým koeficientem kvality. Může také provádět inteligentní řízení, sledovat záznamy inspekcí a výrobních postupů během denní práce, a také se může spojit se systémem MES (Manufacturing Execution System) a sdílet data za účelem zlepšení kvality produktu a snížení nákladů na práci. -
BZW-F4+G je moderní stroj pro stiskování terminálů značky Harting, který nabízí stabilní provoz a snadnou obsluhu. Díky své kompaktní konstrukci a pokročilým funkcím je ideálním řešením pro výrobce hledající efektivní nástroj pro stiskávání terminálů typu Harting. BZW-F4+G disponuje funkcemi odstranění izolace, ovinování, navlékání a stisknutí, co výrazně zvyšuje výrobní výkon. -
Toto zařízení může provádět funkce skórování vysokonapěťových vodičů, odstraňování hliníkové fólie, stříhání stínící sítě a odstranění vnitřní izolace současně; každá z funkcí může být používána nezávisle. Funkce BZW-G5001:- odstranění izolace z vodiče,
- odstranění fólie,
- stříhání stínící sítě,
- odstranění vnitřní izolace,
- obrácení stínící sítě.
-
- Wire diameter range - 0.05-10mm2
- Shut height - 135.8mm
- Stroke 40mm
- Applicable machine type - Semi-automatic terminal crimping machine
- Dimension 185 x 165 x 160 mm
- Weight 8kg
-
- Suitable for different wire diameter.
- Suitable for different model of PV junction box.
- Applicable machine type : BZW-4T-C Mute terminal crimping machine
- Shut height : 125mm
- Stroke : 30-40mm
- Weight :10kg
- Dimension : 130 x 130 x 150mm
-
- Crimping force - 40 kN
- Features - crimping machine for Junction box,
- Dimensions - 1050 x 610 x 1500mm,
- Weight - 120 kg,
-
- Feeding mode - horizontal
- Shut height - 135,78 mm
- Feeding - Max. 40 mm
- Terminal thickness Max. 1,2 mm
- Applicable wire diameter 0,08-6 mm2 (9-30AWG)
- Feeding structure pneumatic
- Weight 6 kg
- Dimension 180 x 155 x 110 mm
- Stroke 40/30 mm
- Application Semi-automatic / Full automatic terminal crimping machine
-
- Measure range - 0-1000N
- Measure mode - Manual
- Testing speed - 30~300 mm/min
- Stroke - 570mm
- Counting function - 9999 cycle
- Voltage - AC 220V
- Weight - 40 kg
- Dimension :360 x 255 x 1000 mm
-
- Materiál - Vysoce uhlíková ocel
- Použití - Poloautomatizované zařízení pro zacvakávání terminálů
- Suw - 30mm
- Váha - 4,4 kg
-
- Wire size: 0,1 - 2,5mm² (AWG12-36) (special size could be ordered)
- Pre-feeding device: servo motor (it is optional)
- Capacity: 4000 - 4200 pcs/hour (the length of each piece is less than 100mm)
- Function: double ends for wire striping and crimping, single end for semi stripping, single end for crimping.
- The adjusting method for blade: microprocessor controlled system + high precision stepping motor driving.
- Cutting length: 35 - 100000 mm (special length could be order)
- Cutting precision: adjusting range 0,5mm + cutting length * 0,5% below
- Stripping length: 1-10mm (special length could be ordered)
- Equipped die: OTP horizontal die, straight die, European style die, Korean die and etc.
- Crimping machine: frequency conversion mute crimping machine
- Control: PLC, touching screen.
- Inspecting items: inspection for wire tangle, defective wire, pre-feeding, wire crimping, and air pressure.
- Power supply: AC 230V/110V 50/60Hz
- Compressed air: 0,5 MPa about 140 N/min
- Outer dimension: 700 x 800 x1500 mm
- Weight: about 300kg
-
- Cable Type – 0,3 – 6 mm² (AWG9 # – AWG23 #), other sizes on request,
- Features – wire cutting, wire stripping, half stripping, one and two-sided crimping,
- Dimensions – 3500 x 1200 x 1700mm,
- Weight -1100 kg.
-
- Cross range AWG22#-AWG28#
- Max. wire pin 20P
- Max. wire width 28 mm
- Single wire width 0,8 - 2,5 mm
- Cutting length 72 - 9999 mm
- Cutting precision ±0,5 mm
- Stripping length 2 - 10 mm
- Crimping force 20 kN
- Capacity 18000PCS/H (20P ribbon cable)
- Power 230V, 50 Hz
- Motor 0,75 kW
- Air supply 0,4 - 0,6 MPa, filtered and dry air
- Weight about 585 kg
- Dimension 1580 x 1345 x 2000 mm
- Function - single end crimping, double ends crimping, interval crimping, positive and negative crimping
-
- Wire range 0,3-6 mm²(AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60-10000mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0.1-18mm
- Feeding speed Max. 8m/s
- Crimping force 30kN
- Power 220V 50HZ
- Air supply 0,5 MPa - 0,7 MPa，8 m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire , terminal crimping lacking and soldering temperature;
- Applicator range OTP applicator, European applicator and pneumatic applicator; It can be installed with CFM. monitoring the crimping quality during the whole processing and 100% traceability.
- Function automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, one end twisting and tinning, another end terminal crimping and seal inserting;
-
Cross section: 0,3 – 5 mm² (Other size can be special ordered) Cutting length: 60-10000mm (Other size can be special ordered) Cutting precision: ±(0.2%*L+1)mm Stripping length: 0,1 – 18 mm Feeding speed: Max. 8,0 m/s Wire collecting conveyor: 2 m, 4 m (Other size can be special ordered) Crimping force: 30 kN Power: 220V 50Hz Air supply: 0,5 MPa – 0,7 MPa, 8m³/h Weight: 1100kg Dimension: 3500 x 1200 x 1700 mm Detecting ability: wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and seal detecting. Applicator range: stroke is 30 and 40 mm . -
- Wire range 0,3 - 6 mm² (AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60 - 10000 mm (Other size can be special ordered）
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1 - 18 mm
- Feeding speed Max. 8,0 m/s
- Crimping force 30 kN
- Power 230V 50Hz
- Air supply 0,5 MPa - 0,7 MPa，8m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and terminal crimping lacking;
- Applicator range OTP applicator, European applicator and pneumatic applicator;
- It can be installed with CFM, monitoring the crimping quality during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, single end heat shrink tubing/jacketing inserting.
-
- Wire range 0,3 - 2,5mm² (AWG13-AWG23) (Other size can be special ordered）
- Cutting length 35 mm~6500 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6.0 m/s
- Capacity 5000 - 5500 pcs/h (within length 100mm)
- Crimping force 20kN
- Voltage 230V, 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa-0,7 MPa，6m³/h
- Weight about 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping
-
- Cutting length 45-600 mm（length can be specified）
- A- end stripping length：0 -5 mm
- B- end stripping length：0-10 mm
- Twisting length 3-8 mm
- Wire type AWG28#-18#flat wire and electronic wire
- Max. wire width 28mm
- Max. wire pin 24P
- Capacity 10000PCS／H(12P flat wire)
- Air supply 0,4 MPa - 0,6 MPa
- Power 220V, 50Hz
- Weight about 500kg
- Dimension 940 x 1100 x 1850 mm
- Function A-end terminal interval crimping, B-end wire twisting and tinning;
- Cutting length 45-600 mm（length can be specified）
-
- Wire range 0,1 - 2,5 mm² (AWG23-AWG13) (Other size can be special ordered）
- Cutting length 35 mm~100000 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Twisting length 4 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6,0 m/s
- Capacity 4500 - 5000 pcs/h (within length 100mm)
- Crimping force 20 kN
- Voltage 230V 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa - 0,7 MPa，6m³/h
- Weight 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping, single end twisting
- Detecting ability wire knotting, wire lacking, terminal lacking and air pressure detecting
- Applicator range Stroke 30 mm (40 mm stoke can be special ordered)
-
- Wire range: 10-120 mm² (AWG6#-AWG0000#),
- Crimping force: 160 kN,
- Rated power: 7,5 kW,
- Average power:3,5 kW
- Power: 380 V / 50 Hz, three phase
- Dimension: 900 x 1000 x 2000 mm
- Weight: 900 kg
- Stroke: 40 mm (50 mm is optional)
-
- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
-
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
