-
BZW-PB - Feeder for both plastic bobbin and plastic wrapped coil with automatic terminal crimping machines or computer-controlled wire stripping machines. -
- Material : Stainless steel machine case，IP54
- Spray tube length:2,5 m，diameter : 20mm
- Dimension: 550x300x320 mm
- Nozzle size：185,5x43x49mm
- Weight: 33kg
- Voltage：110-220V AC 50/60HZ
- Working environment temperature: 5-45°C (35-100°F)
- Working environment humidity: Maximum 90%, no condensation.
-
- Crimping range - needle terminal: 0,5~16mm²(AWG20#-AWG5#)，pre-insulation/bare terminal: 0,1-10mm²(AWG28#-AWG7#)
- Crimping force - 15 kN
- Air supply - 0,5~0,7 MPa
- Dimension - 260 x 120 x 140 mm
- Weight - 4 kg
- Function - pneumatic crimping without any electricity.
-
- Connector type -According to the client's requirements
- Functions - Automatic assembly of connectors
- Precision -> 99%
- Capacity - 15 - 20 pieces per minute
-
Wire range 0,3 - 2,5mm² (AWG13-AWG23) (Other size can be special ordered） Cutting length 35 mm~6500 mm (Other size can be special ordered） Cutting precision ±（0.2%*L+1）mm Stripping length 0,1 - 10 mm (Other size can be special ordered） Feeding speed Max.6.0 m/s Capacity 5000 - 5500 pcs/h (within length 100mm) Crimping force 20kN Voltage 230V, 50Hz Motor 0,75 kW Air supply 0,5 MPa-0,7 MPa，6m³/h Weight about 200 kg Dimension 650 x 700 x 1500 mm Function - single end half stripping, single end crimping -
- Cutting length 45-600mm（length can be specified）
- A- end stripping length：0 -5mm
- B- end stripping length：0-10mm
- Twisting length 3-8mm
- Wire type AWG28#-18#flat wire and electronic wire
- Max. wire width 28mm
- Max. wire pin 24P
- Capacity 10000PCS／H(12P flat wire)
- Air supply 0,4MPa-0,6MPa
- Power 220V 50Hz
- Weight about 500KG
- Dimension 940x1100x1850mm
- Function A-end terminal interval crimping, B-end wire twisting and tinning;
- Cutting length 45-600mm（length can be specified）
-
- Wire range 0,1 - 2,5 mm² (AWG23-AWG13) (Other size can be special ordered）
- Cutting length 35 mm~100000 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Twisting length 4 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6,0 m/s
- Capacity 4500 - 5000 pcs/h (within length 100mm)
- Crimping force 20 kN
- Voltage 230V 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa - 0,7 MPa，6m³/h
- Weight 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping, single end twisting
- Detecting ability wire knotting, wire lacking, terminal lacking and air pressure detecting
- Applicator range Stroke 30 mm (40 mm stoke can be special ordered)
-
- Weight - 2,5 kg
- Max Feeding capacity - 25 mm
- Sliding distance - 30mm
-
Productkenmerken: Precisie en stabiliteit: Het servoklemmingssysteem in de BZW-SF-4040T zorgt voor grote nauwkeurigheid in het klemmen. Dit betekent een hogere kwaliteit van de verbindingen met minder verlies en minder herwerk. Automatische aanpassingen: De klemhoogte kan digitaal worden aangepast met een uitzonderlijke precisie van 0,001 mm, wat een nauwkeurige controle over het klemproces mogelijk maakt en aanpassing aan verschillende terminalgroottes. Kwaliteitsgarantie: Met een ingebouwd drukbeheersysteem bewaakt de BZW-SF-4040T het klemproces in realtime, waardoor wordt gegarandeerd dat elk product voldoet aan de hoogste kwaliteitsnormen. Flexibele productie: Gebruikers kunnen procesparameters voor verschillende productieruns opslaan, wat het snel schakelen tussen kleine partijorders vergemakkelijkt, de downtime vermindert en de productiviteit verhoogt. -
- Measure range - 0-1000N
- Measure mode - Manual
- Testing speed - 30~300 mm/min
- Stroke - 570mm
- Counting function - 9999 cycle
- Voltage - AC 220V
- Weight - 40 kg
- Dimension :360 x 255 x 1000 mm
-
- Feeding mode - horizontal
- Shut height - 135,78 mm
- Feeding - Max. 40 mm
- Terminal thickness Max. 1,2 mm
- Applicable wire diameter 0,08-6 mm2 (9-30AWG)
- Feeding structure pneumatic
- Weight 6 kg
- Dimension 180 x 155 x 110 mm
- Stroke 40/30 mm
- Application Semi-automatic / Full automatic terminal crimping machine
-
- Feeding mode: vertical
- Shut height : 135,78 mm
- Feeding : 40 mm Max
- Terminal thickness: Max. 1.2 mm
- Applicable wire diameter: 0,08-6 mm2 (9-30AWG)
- Feeding structure: pneumatic
- Weight : 6kg
- Dimension: 312 x 155 x 106 mm
- Stroke: 40 / 30 mm
- Application : Semi-automatic / Full automatic terminal crimping machine
-
- Material of the cable tray: wooden or plastic
- Cable tray outer diameter range：800 - 1200 mm.
- Cable tray inner diameter：80mm（other size can be special ordered）
- Bearing weight range：0-2000㎏
- Feeding speed: adjustable
- Motor power：5.5kw
- Power： 380V 50Hz
- Weight：About 400KG
- Dimension ：4000 x 1700 x 1800 mm
-
- Cable Type - 28AWG ~ 18AWG for a single cable; 28AWG ~ 22AWG for a ribbon cable,
- Features - Unwinding of wires,
- Dimensions - 1200 x 700 x 1040mm,
- Weight - 120kg.
-
- Cross secrion: 2,5 mm² - 10 mm² (other sizes on request)
- Wire feeding speed max. 6m/s
- Capacity 7,6 (duble end)
- Power AC 220 V 50 Hz
- Air supply 0,6 MPa
- Weiight 240 kg
- Dimension 2350 x 720 x 1400 mm
-
- Range：ɸ 6~8mm
- Precision：±0.2mm
- Speed：500 - 1000PCS/H （Depending on the speed of the operator）
- Power：AC 220V/50 Hz
- Air supply：0,6 - 0,7 Mpa
- Motor：450W
- Dimension：610 X 500 X 1104 mm
- Weight：95KG
-
Dimension : 400 x 400 x 400 mm Weight : 6kg -
- Max. Processing wire diameter - 6,99mm
- Min. processing wire diameter - 0,81mm
- Cutting depth - 0,01mm
- Max. stripping length - 48mm
- Max. stripping layers - 9 layers
- Drive Model - motor/ball screw driving
- Displaying - touching screen
- Blade materials - 2 pieces, imported tungsten steel.
- Clamping device automatic centralized, motor driving, clamping force control
- Capacity - 500 - 700 pcs/h (it depends on the type and length of the cable)
- Machine starting method - manual/sensitive
- Power supply - 220V, 50Hz
- Power - 380W
- Weight - 19kg
- Outer dimension - 190 x 285 x 530 mm
- Working environment - 50℃, Medium drying workshop, without vibrating working table
-
- Voltage : 220V 5 0Hz
- Temperature range: 1-100°C
- Dimension : 500 x 500 x 600 mm
- Weight : 10kg
-
1. BZW-20TS Servo large terminal crimping machine can change different types of applicators according to different products. 2. Advanced servo motor and PLC control system. 3. Crimping force monitor is used to check if wire crimped qualified; crimping force exceed setting value, machine alarm and stop, and pop up crimping force anomaly window. 4.High-tech industrial computer, PLC and crimping force system , data can be stored and checked. 5.Data storage for different parameters, which allows continuous sequential crimping function. 6. Stable working, large crimping force, overload protection. 7. Applicators made of imported applicator steel, long durability. Note: user should upload data by themselves if connect with MES and server. -
- Wire range - 10-240 mm2
- Crimping force - 300kN
- Stroke - 350 mm
- Crimping width - 12,5mm (other size can be special ordered)
- Weight - 120 kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
- Crimping force - 40 kN
- Features - crimping machine for Junction box,
- Dimensions - 1050 x 610 x 1500mm,
- Weight - 120 kg,
-
- Wire range: 10-120 mm² (AWG6#-AWG0000#),
- Crimping force: 160 kN,
- Rated power: 7,5 kW,
- Average power:3,5 kW
- Power: 380 V / 50 Hz, three phase
- Dimension: 900 x 1000 x 2000 mm
- Weight: 900 kg
- Stroke: 40 mm (50 mm is optional)
-
- Specification: 300 x 340 x 650 mm
- Weight: 60 kg
- Crimping force: 20kN
- Average power consumption: 0,45kW
- Motor power: 0,75 kW
- Power: 220V 50 Hz
- Stroke: 30mm
- Stripping range: 18-34 AWG
-
- Wire range: 0,1-2 mm2 (AWG27#-AWG14#) (Other size can be specially ordered)
- Stripping length: 1-15 mm
- Stripping type：Pneumatic
- Crimping force: 20 kN
- Air supply：0.3~0.4 Pa
- Rated power: 0,75 kW
- Average power: 0,45 kW
- Power: 220V/50Hz
- Dimension: 500 x 350 x 730 mm
- Weight: 70 kg
- Stroke: 30 mm (40 mm is optional)
- Functions: stripping and terminal crimping, especially for cable core, hairline，multi-layers shielded wire and network wire.
-
- Crimping force 60KN
- Rated power 1,5KW
- Average power 0,55KW
- Power 220V/50Hz
- Dimension 400 x 320 x 800mm
- Weight 105KG
- Stroke 30mm (40mm is optional)
-
- Wire range - 10-120 mm2 (Min:AWG10#，240 mm2 can be special ordered）
- Crimping force - 200KN
- Stroke - 350mm
- Crimping width - 12.5mm (other size can be special ordered)
- Weight - 120kg
- Dimension - 500 x 450 x 480 mm
- Power - 220V, 50Hz
-
40 kN terminal crimping press. Cable processing machines. Below is a video showing a similar machine with the designation BZW-4040T. -
40 kN terminal crimping press. Cable processing machines.
-
BZW-2.5T-HSD is een apparaat dat tegelijkertijd de isolatie van twee draden verwijdert en vervolgens een terminal op hen krimpt. Alle parameters van de machine worden ingesteld via een groot en duidelijk touchscreen. Een correcte uitvoering van de operatie wordt gegarandeerd door een optische sensor die de positie van de bewerkte draden controleert. Het apparaat is bedoeld voor de verwerking van HSD-kabels (HSD - Engels). High Speed Data - kabels die het meest worden gebruikt in de automotive industrie voor snelle overdracht van gegevens tussen bijvoorbeeld een computer en modules zoals een 360-graden camera, display, USB-poorten, enz. -
- Material - DC53 die steel
- Application -machinery terminal crimping machine
-
Material : DC53 steel Applicable machinery: terminal crimping machine -
Material - tungsten steel / high speed steel Application - Wire processing machines -
- Applied wire - large size coaxial cable and automotive cable ,
- Power - AC 220V / 110V, 50/60Hz,
- Motor - 800W,
- Stripping length setting unit - 0,01 mm ,
- Cutting wire diameter - 3,0-25 mm,
- Cutting depth setting unit - 0,01 mm,
- Stripping method - rotary cutter,
- Stripping layer - Max.9 layers ,
- Capacity - 300-800 pcs/h ,
- Dimension 1000 x 225 x 400 mm,
- Weight 50 kg,
-
- Stripping capacity and specification 1-10 pieces/ time, AWG#18-#32
- Air pressure 4- 7,5kg
- Weight 15kg
- Min. cutting length 2,5mm
- Stripping and stripping length 2,5 - 25 mm
- Power 90 W
- Max. cutting length 25 mm
- Stripping capacity 120-30 times/minute, adjustable
- Power supply 220V/ 50Hz
- Stripping range 0,1 - 0,75 mm2
- Outer dimension 320 x 230 x 300 mm
-
- Stripping range : 0,1 - 2,5mm²(AWG13#-AWG28#)
- Applied wire type: computer core wire, shielding wire, telephone wire, flat wire, etc.
- Stripping length : 20mm
- Stroke: 20mm
- Air supply: 0,5MPa - 0,7 Mpa
- Weight : 9,5 kg
- Voltage: AC110V/220V 50/60Hz
- Dimension : 260 x 150 x 270 mm
-
- Stripping diameter - max. ø15 mm,
- Functions - wire stripping,
- Dimension - 480 x 330 x 280mm
- Weight - 45 kg.
-
- Stripping diameter - max. ø20 mm,
- Functions - wire stripping,
- Dimension - 600 x 420 x 360mm
- Weight - 30 kg
-
- Stripping diameter - max. ø30 mm,
- Functions - wire stripping,
- Dimension - 615 x 425 x 375mm
- Weight - 40 kg
-
- Stripping diameter - max. ø7 mm,
- Functions - wire stripping,
- Dimension - 400 x 300 x 270 mm,
- Weight - 20 kg.
-
- Terminal arrangement - Horizontal
- Application - Semi - automatic / Full - automatic terminal crimping machine
- Stroke - 30mm
- Weight - 4,4 kg
-
- Terminal arrangement - Vertical
- Application - Semi - automatic / Full - automatic terminal crimping machine
- Stroke - 30mm
- Weight - 4,4 kg
-
- Wire size: 0,1 - 2,5mm² (AWG12-36) (special size could be ordered)
- Pre-feeding device: servo motor (it is optional)
- Capacity: 4000 - 4200 pcs/hour (the length of each piece is less than 100mm)
- Function: double ends for wire striping and crimping, single end for semi stripping, single end for crimping.
- The adjusting method for blade: microprocessor controlled system + high precision stepping motor driving.
- Cutting length: 35 - 100000 mm (special length could be order)
- Cutting precision: adjusting range 0,5mm + cutting length * 0,5% below
- Stripping length: 1-10mm (special length could be ordered)
- Equipped die: OTP horizontal die, straight die, European style die, Korean die and etc.
- Crimping machine: frequency conversion mute crimping machine
- Control: PLC, touching screen.
- Inspecting items: inspection for wire tangle, defective wire, pre-feeding, wire crimping, and air pressure.
- Power supply: AC 230V/110V 50/60Hz
- Compressed air: 0,5 MPa about 140 N/min
- Outer dimension: 700 x 800 x1500 mm
- Weight: about 300kg
-
- Cable Type - 0,3 - 6 mm² (AWG9 # - AWG23 #), other sizes on request,
- Features - wire cutting, wire stripping, half stripping, one and two-sided crimping,
- Dimensions - 3500 x 1200 x 1700mm,
- Weight -1100 kg.
-
- Cross range AWG22#-AWG28#
- Max. wire pin 20P
- Max. wire width 28 mm
- Single wire width 0,8 - 2,5 mm
- Cutting length 72 - 9999 mm
- Cutting precision ±0,5 mm
- Stripping length 2 - 10 mm
- Crimping force 20 kN
- Capacity 18000PCS/H (20P ribbon cable)
- Power 230V, 50 Hz
- Motor 0,75 kW
- Air supply 0,4 - 0,6 MPa, filtered and dry air
- Weight about 585 kg
- Dimension 1580 x 1345 x 2000 mm
- Function - single end crimping, double ends crimping, interval crimping, positive and negative crimping
-
- Wire range - 10-120mm²
- Crimping force - 200KN
- Diameter. Max 38mm
- Crimping width - 12,5mm (Can be special ordered )
- Weight - 160kg
- Dimension - 700 × 860 × 1260 mm
- Power = 220 V, 50Hz
- Motor - 2300 W
-
- Wire range - 2,5-35mm2 ( AWG2#-AWG13#）0,5-10 mm2 can be special ordered
- Crimping force - 40 kN
- Diameter - Max: 26 mm
- Crimping width - 8 mm (other size can be special ordered)
- Weight - 80kg
- Dimension - 560 x 370 x 300 mm
- Power - 220V,50Hz
- Motor - 1500 W
-
- Crimping force: 15KN
- Capacity : 250 pcs / min
- Average electric consumption rate : 0.35KW
- Motor : 0.55KW
- Voltage : AC220V , 50Hz
- Stroke : 23mm
- Air supply : 0.5 Mpa-0.7 Mpa
- Dimension: 300 x 350 x 580mm
- Weight : 50kg
- Copper belt size : 2mm/4mm/6mm
- Feeding mode : By mechanical feeding
- Application : Connection between neon lamp and resistance, connection among wires, connection between slide switch and wire, and connection among thermal sensors such as magnetic reed switch and temperature fuse.
-
De BZW-RK20 kabelrecyclingmachine is bedoeld voor het terugwinnen van metalen uit kabels, voornamelijk koper. Dankzij de mogelijkheid om een breed scala aan kabelmaten aan te kunnen, is het apparaat zeer veelzijdig. Daarnaast kenmerkt het zich door een hoge efficiëntie. -
- Stripping diameter - ø0,75 mm² to ø95 mm²,
- Functions - wire stripping,
- Dimension - 350 x 300 x 400mm
- Weight - 20 kg.
-
1. BZW-20TS kan verschillende soorten applicators veranderen afhankelijk van verschillende producten. 2. Geavanceerde servomotor en PLC-besturingssysteem. 3. Krachtmonitoring wordt gebruikt. 4. Geavanceerde industriële computer, PLC en krimpkrafsysteem, gegevens kunnen worden opgeslagen en gecontroleerd. 5. Gegevensopslag voor verschillende parameters, die een continue sequentiële krimpfunctie mogelijk maken. 6. Stabiele werking, grote krimpkrafforce, overbelastingsbeveiliging. 7. Applicators gemaakt van geïmporteerd applicatorstaal, lange levensduur. -
- Crimping force - Max.40kN
- Rated power - Max.2,0kW
- Power - 220 V, 50Hz
- Dimension - 1050 x 600 x 1500 mm
- Weight - 120KG
- Stoke - 30 mm, 40 mm common use
- Applied applicator - OTP applicator, pneumatic applicator, European applicator
-
De BZW-9A ultrasone lasmachine is een apparaat dat speciaal is ontworpen voor het verbinden van koperdraden met behulp van geavanceerde ultrasone technologie. De apparatuur integreert de nieuwste ontdekkingen op het gebied van akoestiek, mechanica en polymeerwetenschap om ongeëvenaarde prestaties en betrouwbaarheid te bieden in draadverbindingstoepassingen. -
- Measurement range - 0 - 5000N
- Functions - Measurement of breaking force, aging
- Dimensions - 410 x 260 x 1000 mm
- Weight - 75 kg
-
Mostly used for terminal crimping of aviation plug. Crimping on the four edges of terminal to make better contact between conductor wire and terminal. Exquisite in structure design, evenness crimping force and excellent finished shape of terminal crimping .- Wire diameter range - 0.05-10mm2
- Shut height - 135.8mm
- Stroke 40mm
- Applicable machine type - Semi-automatic terminal crimping machine
- Dimension 185 x 165 x 160 mm
- Weight 8kg
-
- Terminal arragement - horizontal / vertical
- Application - Semi - automatic terminal crimping
- Stroke - 30 mm
- Weight - 6.3Kg
-
- Terminal arragement - horizontal / vertical
- Application - Semi - automatic terminal crimping
- Stroke - 30 mm
- Weight - 6.3Kg
-
- Terminal arrangement - Vertical
- Application - Półautomatyczne urządzenia do zagniatania terminali
- Stroke - 30mm
- Weight - 4.4Kg
