-
BZW-F4+G is een moderne machine voor het krimpen van Harting-terminals, die stabiele werking en eenvoudige bediening biedt. Dankzij zijn compacte ontwerp en geavanceerde functies is het een ideale oplossing voor producenten die op zoek zijn naar een efficiënt gereedschap voor het krimpen van Harting-terminals. BZW-F4+G heeft functies voor het verwijderen van isolatie, twisten, inrijgen en krimpen, wat de productie-efficiëntie aanzienlijk verhoogt. -
De semi-automatische lijn BZW-6.0FK01 wordt voornamelijk gebruikt voor het verwerken van Fakra-kabels. De machine is modulair opgebouwd en kenmerkt zich door een stabiele prestatie en een hoog kwaliteitsniveau. Het kan ook intelligent management voeren, inspectierecords en productieprocedures volgen tijdens dagelijkse werkzaamheden, en het kan verbinding maken met een MES (Manufacturing Execution System) en gegevens delen om de productkwaliteit te verbeteren en arbeidskosten te verlagen. -
- Specification: 270 x 260 x 640 mm
- Crimping force: 20kn
- Weight: 54kg
- Average power consumption: 0,45kw
- 5.Motor power: 0,75 kW
- Power: 220v 50Hz
- Stroke: 30mm (40mm could be ordered)
-
- Application range - Electronic connecting wire, braided tube, jacket tube, motor coils, home appliances, cable, etc.
- Tie length - 60mm/80mm/100mm/120mm/150mm
- Capacity - 1500PCS/h ( Depending on products )
- Power - AC220V 50/60HZ
- Power - 100W
- Dimension - 1230 x 550 x 800 mm
- Weight - 150kg
-
- Cutting diameter - 1-200 mm
- Features - Cutting of cable tubes
- Dimension - 350 x 250 x 320 mm
- Weight - 65 kg
-
Applicable tube diameter - ø1 - ø100 mm Applicable tube type - heat-shrink tube, ribbon cable, shielding wire, etc; It can add hot-melt cutter to process the color ribbon belt and nylon braid. Cutting length - 2 mm - 10000 mm Cutting width - 1-100 mm Cutting tolerance - 0,02 x L, ±0.2 mm Capacity - 10800 PCS/H (Depending on tube material ) Speed adjustment - 00-99 Cutter material - Tungsten steel Voltage - AC220V/50Hz Power - 170W Dimension - 350 x 250 x 320 mm Weight - 23kg -
- Application - suitable for AC wire, HDMI wire, network cable, PC wire, earphone wire, video wire, etc..
- Applicable wire - 1,5mm＜= OD＜=15,0mm
- Wire length - 0,6-6m
- Front length - 200mm
- Rear size - 0-200mm
- Coiling size - 0-300mm
- Middle coiling - 0-300mm
- Wire coiling shape - suitable for coiling 8-shaped wire
- Capacity - ≦1980pcs/h (Depending on the wire material )
- Voltage - 210-240V 5A
- Air supply - 0.5-0.6MPa
- Dimension - 1700 x 600 x 1600mm
- Weight - 300kg
- Function - wire cutting, wire winding and wire tying
-
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6Mpa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43KG
-
- Capacity - 2500pcs/h
- Tape length - 55-100mm
- Tape width - 25-40mm
- Wrapping outer diameter - <10mm
- Tape inner diameter - 38mm or 75mm
- Air supply - 0,5-0,6 MPa
- Power - 220V/50HZ
- Dimension - 450 x 330 x 460 mm
- Weight - 43 kg
-
- Stripping range: 4-50 mm²
- Stripping Length: 1-200mm(wire head), 1-100mm(wire end)
- Feeding Speed: Max. 6,0 m/s
- Max. stripping diameter: 16 mm
- Capacity: 1000-5000 pcs/h
- Power: 220V, 50Hz, 0,3 kw
- Air Supply: 0,2 - 0,6 MPa
- Weight: 115kg
- Dimension: 1200 x 630 x 430mm
- Stored program: 0 - 99 kinds of processing data.
- Stripping layer: 3 layers
-
Stripping range: 4 - 25 mm² Stripping length: 1-200mm(wire head), 1-100mm(wire end) Winding length: 4 - 20m Winding diameter: 3-8 mm Capacity: 1000-1200 pcs/h Power: 220V, 50HZ, 0,3 KW Air Supply: 0,4-0,6 MPa Weight: 470 kg Drive 8 wheels servo motor driven Dimension: 800 x 650 x 450 mm Stored program: 0-99 kinds of processing data. Stripping layer: 3 layers -
Wire range - 4 - 70 mm² Stripping layers - max. 3 Middle striping capacity - 40 sections Dimension - 945 x 615 x 1270 mm Weight - 250 kg -
- Outer diameter Ø 2-14mm
- Stripping range 4-25mm2
- Cutting length 0,1-100000 mm
- Cutting precision ±（0,2+0,002*L）mm
- Drive Belt conveyor , 8 wheels independently servo driven
- Stripping type Rotary and stripping cutter
- Stripping length wire head 0,1-200mm, wire end 0.1-100mm
- Tool materials Imported high speed steel and import tungsten steel
- Stripping speed 450 - 650pcs/h
- Power AC220V/110V 50/60Hz
- Motor 0,75 kW
- Air pressure 0,4 - 0,6MPa
- Weight 298kg
- Dimension 1100*615*1270 mm
- Display mode touch screen
- Display interface 10 Inch Touch screen with English and Chinese system
-
- Type Coaxial cable stripping machine
- Stripping range 6 - 120 mm²
- Cutting length 240 - 99999,99 mm
- Cutting precision 0.2% mm
- Stripping length wire head 1-260 mm,wire end 1-120 mm
- Drive 8 wheels independently servo driven
- Capacity 500-900 pcs/h (it depends on the length of the wire)
- Voltage 230 V, 50 Hz
- Motor 2,3 kW
- Stored programs 0 - 99 kinds of processing data
- Tool materials Imported high speed steel
- Nozzle diameter ø 6-28 mm
- Press wheel setting Motor drive, digital control of crimping force
- Stripping layer 3 layer
- Weight 470 kg
- Dimension 1300 x 800 x 1330 mm
-
Stripping range: 0,1-6 mm² Cutting length: 0,1-99999,99mm Stripping Length: 0,1 - 30 mm (other size can be special ordered) Drive: 4 wheels driven Nozzle diameter: 3 - 8 mm Capacity: 3600 pcs/h (50 mm) Power: 230V, 50HZ, 0,3 kW Stored programs: 0 - 99 kinds of processing data Tool materials: Imported high speed steel Cutter High speed steel Air supply: 0,2 - 0,6 MPa Stripping layer: 3 layers Dimension: 480 x 400 x 320 mm Weight: 40 kg -
BZW-2.0X machine has the function of wire cutting, stripping and terminal crimping. PLC control system. Exquision appearance and compact structure, space saving and artistic appearance. Simple and quick replacement of the spare parts, full digital troubleshooting, and easy to maintenance. -
- Wire range - within 20pin, AWG28#：1-20pin； AWG26#：1-15pin； AWG24#：1-12pin
- Cutting length - 30 - 99999 mm
- Dividing length - 1 - 200 mm
- Cutting precision - ±（0,2%*L+1）mm
- Stripping length - wire head 0,1-30mm , wire end 0,1-30 mm
- Capacity - 1000-3000 pcs/h
- Tool materials - Imported tungsten steel and high speed steel
- Drive: 4 wheels driven
- Feeding speed: 0,7m/s
- Power - 220V 50HZ
- Motor - 0,3KW
- Air supply - 0,3MPa - 0,5 MPa
- Weight - 31kg
- Dimension - 460×297×345 mm
-
- Outer dimension: 420 x 580 x 320 mm
- Weight: 35 kg
- Display: 128 x 80 Blue LCD in Chinese
- Power supply: AC215-235V ≦50/Hz
- Power: 120 - 250 W
- Cutting length: 1mm-99999,9mm
- Middle stripping: 13 stripping positions in the middle.
- Stripping length: Stripping head: 0,1 - 30mm, stripping end: 0,1 - 30mm
- Applicable wire core area: 0.1-2.0mm2 *2 (AWG11#-28#) x2
- Cutting tolerance: 0,002 x L mm (within) x L= cutting length
- Twisting range: AWG11#-28# (double line)
- Twisting length: 0-30mm
- Max. Guide bushing diameter: 1,5-5mm
- Blade materials: imported high speed steel, tungsten steel
- Drive: 4 Wheels driving
- Stripping capacity per hour: 4000-10000 pieces
- Wire pressure adjustment: have
- Pulse equivalent: no error within 1 m.
- Program: it can storage 200 programs; it doesn’t need to reset parameters while changing the different wire.
- Total: 999999 pieces
- Batch: 99999 pieces
- Blade motor precision: 0,03mm
- Precision for inlet and outlet motor: mute mixed stepping motor, each step is about 0,1mm
- Remarked function: automatic pre-feeding and discharging, time sets for automatic starting, exclusive striping and discharging the wire. The program 96 is for processing the super short wire.
- The shortest twisting function: the wire could be twisted while the middle part of the wire skin length remains 26mm.
-
Inner core cross section 2x0,1 - 2x,5 mm² Cutting precision ±（0.2%*L+1）mm Stripping length sheath（wire head 0,1-200 mm , wire end 0,1-150 mm）Inner core （wire head 0,1-100 mm , wire end 0,1-100 mm） Capacity 1000-3000 pcs/h Tool materials Imported tungsten steel and high speed steel Drive 4 wheels driven Feeding speed 0,7 m/s Voltage 230V 50 Hz Motor 0,3 kW Air supply 0,4 MPa-0,6 MPa Weight 31kg Dimension 420 x 297 x 345 mm -
- Wire range 0,1 - 2,5 mm² *2 wires
- Cutting length 10 - 99999mm
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1-30mm (Other size can be special ordered）
- Capacity - 6000 - 15000 pcs/h
- Tool materials Imported tungsten steel and high speed steel
- Drive 4 wheels driven
- Feeding speed - 2m/s
- Voltage - 230V 50HZ
- Power - 0,3KW
- Weight - 30kg
- Dimension - 420 x 340 x 280 mm
-
- Wire range 0,1 - 2,5 mm2 （AWG13#-AWG28#） *Multi core
- Wire diameter less than Φ12 mm
- Cutting length 0,1 - 99999 mm
- Cutting precision ±（0.2%*L+1）mm
- Stripping length
- Wire head 0,1 - 200 mm wire end 0,1 - 150 mm (other size can be special ordered）
- Capacity 1000 - 5000 pcs/h
- Tool materials Imported tungsten steel and high speed steel
- Drive 4 wheels driven
- Feeding speed 1m/s Voltage 220 V, 50 Hz
- Power 0,35 kW
- Air supply 0,3 MPa-0,5 MPa
- Weight 31kg
- Dimension 420 x 297 x 345 mm
-
Applied wire type Multi-core round and flat sheathed cable Diameter Ø 2-14（other size can be special ordered） Inner core 1-5 piece Cutting length 0,1-100000mm Cutting precision ±（0.2+0.002*L）mm Drive Belt conveyor, 8 wheels independently servo driven Outer stripping length wire head 0,1 - 200 mm, wire end 0,1 - 100 mm Inner stripping length wire head 0,1 - 30 mm, wire end 0,1 - 30 mm Power AC220V/110V, 50/60 Hz Motor 0,75 kW Air pressure 0,4-0,6 MPa Weight 247 kg Dimension 945 x 615 x 1270 mm Display mode Touch screen Display interface 10 Inch Touch screen，with English system -
- Stripping range 16 - 240 mm²
- Cutting length 10 - 99999,99mm
- Cutting precision ≤0.2%mm
- Stripping length wire head 1 - 600mm, wire end 1 - 280mm
- Drive 8 wheels independently servo driven
- Tool materials Imported high speed steel
- Feeding speed 0,8m/s
- Capacity 500-800 pcs/h (it depends on the length of the wire)
- Power 230V, 50Hz
- Motor 0,75KW
- Air supply 0,2-0,6 MPa
- Weight 600 kg
- Dimension 1600 x 810 x 1360 mm
-
- Stripping range 6 - 120 mm²
- Cutting length 10 - 99999,99 mm
- Cutting precision ≤0.2%mm
- Stripping length - wire head 1 - 260 mm, wire end 1 - 120 mm
- Drive 8 wheels independently servo driven
- Capacity 500-900 pcs/h (it depends on the length of the wire)
- Power 230V, 50 Hz
- Motor 2,3 kW
- Stored procedure 0 - 99 kinds of processing data
- Tool materials Imported high speed steel
- Nozzle diameter ø 6-28 mm
- Press wheel setting Motor drive, digital control of crimping force
- Stripping layer 3 layer
- Weight 445kg
- Dimension 1300 x 800 x 1330 mm
-
- Capacity - 15-20 pcs/min,
- Function - automatically tighten the nut of the junction box as per the requirement,
- Air supply - 0.5 Mpa-0.7 Mpa (dry and clean air source),
- Power - AC 220 V, 50/60Hz,
- Dimension - 600 x 500 x 1200mm
-
- Stripping range 4 - 50 mm²
- Cutting length 0,1 - 99999,99 mm
- Cutting precision 0,2%mm
- Stripping length wire head 1 - 200 mm, wire end 1 - 100 mm
- Capacity 1000 - 15000 pcs/h (it depends on the length of the wire)
- Power 220V, 50Hz
- Motor 0,3 kW
- Stored programs 0 - 99 kinds of processing data
- Tool materials Imported high speed steel
- Tube diameter ø 6 - 18 mm
- Max. stripping diameter 16 mm
- Air supply 0,2-0,6 MPa
- Stripping layer 3 layer
- Weight 105 kg
- Dimension 800 x 650 x 45 0mm
-
- Diameter van snijden - 5 - 35 mm.
- Functies - Kabelbuizen snijden.
- Afmetingen - 560 x 440 x 400 mm.
- Gewicht - 72 kg.
-
- Power - AC 220V, 50/60Hz Single phase
- Function - Wire cutting、single end strip、double end strip、single end half strip、double end half strip、single end twisting、single end crimping，single end tinning
- Cutting length - 30mm-99999.9mm
- Stripping length - Wire head：0,1mm-7mm
- Twisting length - 3mm - 7mm
- Tube diameter - ɸ 1.5mm-5mm
- Cross section - AWG#16-AWG#32
- Crimping force - 2.0T
- Working speed - 4000-5000pcs/hour
- Crimping position - Digital adjustment
- Detection device - Low air pressure、wire lack or not、punch unwell、Wire knotting
- Tool material - tungsten steel/ high speed steel
- Dimension - 900mm*600mm*1400mm（Excluding raised part）
- Weight - 250kg
-
- Computerized control, touch screen, servo motor, more stable and easy to operate;
- High speed wire stripping, wire head, wire end and total length can be set randomly within the wire cutting range;
- The speed of wire feeding, wire cutting and stripping can be set independent, to reach the best effect of stripping;
- BZW-882DJ has the function of setting total quantity, bundle quantity, time postpone, middle stripping and etc;
- Motor drive using subdivision method, with high precision and long service life;
- 100kinds of different wire date can be stored in the system.
-
- Wire range - 4-6mm² (Other size can be special ordered）
- Cutting length - 60-99999mm (Other size can be special ordered）
- Cutting precision - ±（0.2%*L+1）mm
- Stripping length - 0,1-18,5mm
- Feeding speed - Max. 8,0 m/s
- Crimping force - 30kN
- Voltage - 220V, 50HZ
- Air supply - 0,5 MPa-0,7 MPa，8m³/h
- Weight - 1100kg
- Dimension - 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, air pressure, bare wire and lack of terminal crimping detecting;
- Applicator range - OTP applicator, European applicator and pneumatic applicator
- It can be equipped with pressure monitoring system, monitoring the pressure during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping(it is optional)
-
- Diameter of the wire - ø1,0 - ø5,5 mm
- Funkcje - Automatic coaxial cable cutting and stripping (9 layers)
- Dimensions - 800 x 700 x 440 mm
- Weight - 100 kg
-
- Diameter of the wire - ø0,64 mm - ø4,0 mm
- Funkcje - Automatic coaxial cable cutting and stripping (9 layers)
- Dimensions - 800 x 700 x 440 mm
- Weight - 100 kg
-
Material - Tungsten Steel / High speed steel Compatible - Automatic terminal crimping machine -
Suitable for different wire diameter. Suitable for different model of PV junction box. Applicable machine type : BZW-4T-C Mute terminal crimping machine Shut height : 125mm Stroke : 30-40mm Weight :10kg Dimension : 130 x 130 x 150mm -
- Wire range: 2.5 - 70mm
- Combing length: 150 mm (other size can be special ordered)
- Weight: 42 kg
- Dimension: 530 x 320 x 290mm
- Voltage: 220V/50Hz
- Power: 240W
- Speed: 3 s/pcs (adjustable)
-
This is a new mode cable processing machine controlled by micro computer, especially used for processing the wire harness in the industry of automobiles, power cable industry, electronic control cabinet ,charging point wire harness, charging gun wire harness, PV hard wire, BVR flexible wires. It can process coils of wire by setting its total length, head stripping and rear stripping as required, which greatly improves working efficiency. Automatic wire cutting, stripping on two ends, and multi-layers stripping at one time. Industrial level control chip and high precise servo driver, which ensure high speed and stable running for long lifetime. Motion controller, touching screen operation, up to 100 stripping archives can be stored. Automatic wire diameter adjustment, there is no need to change cutting tools for different cables. The cable of outer diameter under 14 mm can be easily processed, the strong driving force ensures the high working efficiency. The machine is multi-functional, there have been reserved some communication ports for connecting auxiliary devices. Auxiliary devices: automatic wire feeder, wire collecting device, mechanical arms, wire winding unit and so on. -
- Crimping range 0.5 - 2.5mm2 (AWG 20-14)
- Crimping length 6/8/10mm
- Power supply 230V/50Hz/60V
- Air pressure 5 bar
- Cycle time approx 1.0 second
- Dimension 400 x 340 x 450 mm
- Weight 32 kg
-
- Wire range 0,3 - 6 mm² (AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60 - 10000 mm (Other size can be special ordered）
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1 - 18 mm
- Feeding speed Max. 8,0 m/s
- Crimping force 30 kN
- Power 230V 50Hz
- Air supply 0,5 MPa - 0,7 MPa，8m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and terminal crimping lacking;
- Applicator range OTP applicator, European applicator and pneumatic applicator;
- It can be installed with CFM, monitoring the crimping quality during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, single end heat shrink tubing/jacketing inserting.
-
- Wire range 0,3-6 mm²(AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60-10000mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0.1-18mm
- Feeding speed Max. 8m/s
- Crimping force 30kN
- Power 220V 50HZ
- Air supply 0,5 MPa - 0,7 MPa，8 m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability - wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire , terminal crimping lacking and soldering temperature;
- Applicator range OTP applicator, European applicator and pneumatic applicator; It can be installed with CFM. monitoring the crimping quality during the whole processing and 100% traceability.
- Function automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, one end twisting and tinning, another end terminal crimping and seal inserting;
-
Cross section: 0,3 - 5 mm² (Other size can be special ordered) Cutting length: 60-10000mm (Other size can be special ordered) Cutting precision: ±(0.2%*L+1)mm Stripping length: 0,1 - 18 mm Feeding speed: Max. 8,0 m/s Wire collecting conveyor: 2 m, 4 m (Other size can be special ordered) Crimping force: 30 kN Power: 220V 50Hz Air supply: 0,5 MPa - 0,7 MPa, 8m³/h Weight: 1100kg Dimension: 3500 x 1200 x 1700 mm Detecting ability: wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and seal detecting. Applicator range: stroke is 30 and 40 mm . -
De BZW-886D automaat is ontworpen voor het strippen van coaxkabels. De machine kenmerkt zich door een hoge efficiëntie en een groot strippingsbereik van 0,1 mm tot 200 mm. Het wordt gevoed door een 230V AC spanning. De BZW-886D maakt het mogelijk om tot 9 lagen te strippen. Het strippen gebeurt met roterende messen, wat een zeer hoge precisie en snelle werking garandeert. -
BZW-3.0 C C PM 4M is upgrade of automatic high precise double ends terminal crimping machine. Mainly for power, automotive, new energy industry wire hamess preocessing. BZW-3.0 C C PM 4M can realize long wire cuttin, wire stripping, marking, waterproof seal inserting and double ends terminal crimping at the same time. -
- Terminal arrangement - Vertical
- Applicable mechine type - semi-automatic / full automatic terminal crimping machine
- Stroke - 40 mm
- Weight - 6,3 kg
-
- Specification - 310 x 270 x 710 mm
- Crimping force - 40 kN
- Weight- 58 kg
- Average power consumption - 0,85kw
- Motor power - 1,5 kw
- Power - 220v 50Hz
- Stroke - 30mm (40mm could be ordered)
-
- Crimping width - 7mm (Can be special ordered)
- Crimping terminal size - ≤2.5mm²
- Dimension - 360*550*680mm
- Weight - 106kg
-
- Crimping force - 25kN
- Rated power - 0,75kW
- Average consumption - 0,45kW
- Power - 220V/50Hz
- Dimension - 360 x 550 x 680 mm
- Weight - 98 kg
- Stroke - 30 mm/40 mm
-
- Applied wire - middle size coaxial cable
- Voltage - AC220V/110V, 50/60 Hz
- Motor - 600 W
- Stripping length - 0,1 mm - 90 mm
- Stripping length setting unit - 0,01 mm
- Cutting wire diameter - 3,0 - 15 mm
- Cutting depth setting unit - 0,01 mm
- Stripping method- rotary cutter
- Stripping layer - Max.9 layers
- Capacity - 400-800 pcs/h
- Dimension - 720 x 230 x 350 mm
- Weight - 40 kg
-
- tying belt length - 75-140 mm
- tying diameter - 5-30 mm
- winding outer diameter - 50-200 mm
- winding distance - 100-200 mm
- tying speed - 0,6 time/second
- winding speed - 1-10 laps/second tying belt - encapsulated iron core
- power - AC 220 V, 60 Hz
- rate power - <200 W
- weight - 40KG
- dimension - 500 x 300 x 400 mm
-
Wire Type - 1-25mm2 (AWG3 # -18 #) Features - Cutting, skinning, half-skinning Number of layers - Max 1 Dimensions - 420 x 297 x 345mm Weight - 33 Kg -
The presented set allows for cutting, striping and marking of wires. Set consisting of:- BZW-882DJ automatic wire cutting and stripping machine,
- ITS-PRV380P-W cable printers.
-
- Applied range:5-30mm (other size can be special ordered)
- Application: charging cable nuts tighten
- Weight: 80kg
- Dimension:550×320×350mm
- Motor:400W
- Capacity:15-20pcs/min
-
- Applied wire diameter - AWG14-32# (0.03-2.08mm2)
- Wire type - thin wires such as PVC, solid core wire, single stranded wire, rubber wire, computer core wire, and telephone wire, etc..
- Stripping length - 1-20mm
- Diameter precision - 0,01mm Processing time about - 0,3pcs/s
- Stroke - 20mm
- Air supply - 0,5MPa-0,8Mpa
- Weight - 3,5kg
- Dimension - 260 x 150 x 270 mm
-
- Cutting length: 1 mm - 99999 mm
- Middle stripping: 4 stripping positions in the middle.
- Cutting tolerance: 0,002 x L mm (within) x L= cutting length
- Stripping length: wire head: 0 - 30mm, wire end: 0 - 15mm
- Applicable wire core area: 0,1- 6,0 mm² (AWG 30#-10#)
- Applicable wire: plastic, PVC, Teflon, glass materials wire.
- Max. Guide bushing diameter: 10
- Blade materials: hard tungsten steel (long service time)
- Stripping capacity per hour: within length 100 mm, 7000 - 3000 pieces
- Output speed: Express
- Wire outer diameter adjustment: needed
- Stripping quality: excellent
- Wheel clamping force adjustment: have
- Speed adjusting rates: 0 - 9
- Stripping pressure adjustment: adjustable
- Drive: 4 Wheels driving
- Feedback from customer: extremely good
- Outer dimension: 420 x 340 x 280 mm
- Weight: 28 kg
- Power supply: AC220V/50Hz (optional AC110V/60Hz)
- Power: 200 W
-
- Power - AC 220V, 50/60 Hz,
- Function - Tightening nuts of connector to the required position,
- Capacity - 15-20 pcs/min,
- Inspecting device - The tightening distance is controlled by the distance or the torque force,
- Dimension - 500 x 400 x 280 mm,
- Weight - 50 kg.
-
Toestel kan tegelijkertijd functies uitvoeren zoals het strippen van hoogspanningskabels, het verwijderen van aluminiumfolie, het snijden van afschermingsnet en het strippen van interne isolatie; elke functie kan onafhankelijk worden gebruikt. Functies van de BZW-G5001:- Het strippen van hoogspanningskabels
- Het verwijderen van aluminiumfolie
- Het snijden van het afschermingsnet
- Het strippen van interne isolatie.
- Elke functie kan afzonderlijk worden gebruikt
