Comprehensive wire processing, cutting, striping, semi stripping, crimping, twisting, tinning, seal inserting, testing finished products, CFM – crimping force monitor, cutting corugated tubes, taping, unwinding, binding. Everything you need to produce cable bundles. We offer a wide range of wire machines that meet the requirements of modern wire processing. Wire processing machines – check our offer. If you want to know more about wire processing machines, contact us.
Compact industrial brushless screwdriver for precise and repeatable screwdriving and tightening of M1.4–M2.6 screws. Adjustable torque range of 0.03–0.63 Nm with ±3% accuracy, weighing just 340 g.- Torque Accuracy: ±3%
- Brushless motor for stable and durable operation
- Operating speed: 800–1000 rpm
- Included in the set: screwdriver, power cable, controller, and bits
High-precision industrial brushless screwdriver designed for repeatable fastening of M1.6–M3.0 screws. Features adjustable torque of 0.2–1.18 Nm with ±3% accuracy and an ergonomic design weighing 540 g.- Torque Accuracy: ±3%
- Brushless motor for stable and durable operation
- Operating speed: 1,600–2,000 rpm
- Included in the set: screwdriver, connection cable, controller, and bits
Linear push-pull reaction arm for industrial screwdrivers. Absorbs reaction torque and supports the weight of the tool, reducing operator fatigue and ensuring perpendicular, repeatable screw tightening. Tool mounting diameter: 28–45 mm. Vertical working range: 600 mm.- Linear push-pull design
- Tool mounting range: 28–45 mm
- Vertical working range: 600 mm
- Horizontal working range: 300–680 mm
Compact industrial brushless screwdriver designed for precise and repeatable fastening of M3.0–M5.0 screws. Features adjustable torque of 0.98–3.43 Nm with ±3% accuracy and a 1/4" HEX bit holder.- Torque Accuracy: ±3%
- Brushless motor for stable and durable operation
- Operating speed: 450–650 rpm
- Included in the set: screwdriver, connection cable, controller, and bits
A high-performance industrial brushless screwdriver designed for precise and repeatable fastening of M8.0–M10 screws. Features a wide torque range of 5.88–14.7 Nm with ±3% accuracy, a durable industrial-grade housing, and a 1/4- Torque Accuracy: ±3%
- Brushless motor for stable and durable operation
- Operating speed: 350 rpm
- Included in the set: screwdriver, power cable, controller, and bits
An industrial brushless screwdriver with high torque, designed for precise and repeatable fastening of M5.0–M6.5 screws. Features adjustable torque of 2.94–6.8 Nm with ±3% accuracy, a durable construction, and a 1/4" HEX bit holder.- Torque Accuracy: ±3%
- Brushless Motor: High efficiency and long service life
- Operating Speed: 800 rpm
- Included in the Set: Screwdriver, controller cable, controller, and bits
Angled reaction arm (bend type) for industrial screwdrivers. Absorbs reaction torque and supports the tool's weight, reducing operator fatigue and helping ensure perpendicular, repeatable screw tightening. Tool mounting range: 28–45 mm. Vertical working range: 700 mm.- Angled bend-type design
- Tool mounting range: 28–45 mm
- Vertical working range: 700 mm
- Horizontal Working Range (Left–Right): 160–650 mm
Spring balancer for suspending electric screwdrivers at assembly workstations. Reduces operator fatigue, keeps the tool at the desired working height, and automatically returns it to its original position after use. Load capacity: 0.5–1.5 kg. Cable travel length: 1.5 m.- Load capacity: 0.5–1.5 kg
- Cable travel length: 1.5 m
- Adjustable working height
- Lightweight design: only 0.4 kg
Automatic screw feeder for assembly workstations. Automatically feeds screws into the pick-up position, speeding up screwdriver operations. Adjustable rail accommodates screws with diameters of 1–5 mm and lengths of up to 20 mm. Feeding speed: 2 screws/s. Hopper capacity: 200 cm³.- Feeding Speed: 2 screws/s
- Screw Diameter: Approx. 1–5 mm; Screw Length: Up to 20 mm
- Hopper Capacity: 200 cm³
- Power Supply: 15 V DC (230 V AC adapter)
Digital torque tester for checking and calibrating electric screwdrivers. Measurement range of 0.15–10 Nm with ±0.5% accuracy, bidirectional measurement, OK/NOK evaluation, measurement data storage, and USB data export.- Measurement Range: 0.15–10 Nm
- Measurement Accuracy: ±0.5%
- Modes: PEAK, Real-Time Tracking (TRACK), FIRST PEAK
- Battery-Powered, USB Interface
The ITS-FE-S01 is a benchtop fume extractor designed for anyone who solders regularly. It captures smoke and harmful fumes right at the source, before they reach your lungs. A quiet brushless motor, a two-stage HEPA filter with activated carbon and 3-level suction control — all in a compact metal housing that fits on any desk.
ITS-FE-M02 — solder fume extractor with LCD display and remote control, 99.97% filtrationA high-performance fume extractor with 150 W of power and airflow of up to 258 m³/h (139 CFM). Three-stage HEPA H13 + activated carbon filtration removes up to 99.97% of smoke, particles and odours. Digital LCD display, control via the panel or remote, timer and filter-clogging alarm. Metal housing and quiet operation (<63 dB). Ideal for soldering, electronics assembly, 3D printing, DTF printers and lasers up to approx. 10 W.
The compact and quiet ITS-FE-M01 fume extractor captures smoke at the source and removes up to 99.97% of harmful particles (≥0.3 µm). Its three-stage filtration system combines an H13 HEPA filter with activated carbon, while an efficient airflow of approximately 200 m³/h and noise levels below 55 dB ensure effective and quiet operation.
Ideal for soldering, electronics assembly, 3D printing, laser machines up to 10 W, and beauty salons. Features include a flexible extraction arm, two hoods, and a filter replacement alarm.
Mobile fume extractor with two inlets, designed to serve two workstations simultaneously or one workstation requiring higher extraction capacity. With 210 W of power and an airflow rate of 330 m³/h (194 CFM), combined with a three-stage filtration system (pre-filter + H13 HEPA + approximately 1.7 kg of activated carbon), it removes up to 99.97% of dust and fumes.
Exceptionally quiet operation (<52 dB), smooth suction adjustment via a control knob, and heavy-duty caster wheels make it easy to use and move around. Ideal for nail salons, 3D printing, dual laser workstations, so
ITS-FE-B01 — Fume and Dust Extractor for Nail Salons, 3D Printing and Soldering, 99.97% Filtration EfficiencyA powerful 210 W fume extractor with an airflow rate of up to 330 m³/h (194 CFM). Its three-stage filtration system (pre-filter + H13 HEPA + coconut-shell activated carbon) removes up to 99.97% of particles down to 0.3 µm, as well as harmful fumes such as acetone, formaldehyde, toluene, benzene, MMA and other VOCs. It also captures acrylic dust and fine filing particles. Quiet operation (<60 dB), a flexible hose and two extraction hoods are included. Ideal for beauty salons, 3D printing, laser applications and soldering — no external ventilation required.
The BZW-F4+Z machine is a modern semi-automatic device designed for fast and precise wire processing. In a single cycle, the device can strip insulation, twist wires, insert a ferrule, and crimp it, which significantly increases production efficiency and reduces the risk of assembly errors.
Zgrzewarka ultradźwiękowa BZW-9A to urządzenie zaprojektowane specjalnie do łączenia przewodów miedzianych przy użyciu zaawansowanej technologii ultradźwiękowej. The equipment integrates the latest discoveries in acoustics, mechanics and polymer science to provide unparalleled performance and reliability in wire bonding applications.
BZW-SF-4040T, a multifunctional terminal crimping press. Equipped with an advanced servo control system and an optional PC operating system. It offers unmatched data collection capabilities regarding crimping processes, allowing for real-time tracking and quality control. Moreover, this device can be integrated with MES systems, enhancing its utility in modern production setups.
The BZW-RK20 cable recycling machine is designed for recovering metals from cables, mainly copper. Thanks to its ability to handle a wide range of cable sizes, the device is highly versatile. Additionally, it is characterized by high efficiency.
The semi-automatic BZW-6.0FK01 line is mainly used for processing Fakra cables. The machine is made in a modular style, characterized by stable performance and a high quality coefficient. It can also conduct intelligent management, track inspection records and production procedures during daily operations, and can connect with the MES (Manufacturing Execution System) to share data, in order to improve product quality and reduce labor costs.
BZW-F4+G is a modern machine for crimping Harting terminals, offering stable operation and easy handling. With its compact design and advanced features, it is the perfect solution for manufacturers seeking an efficient tool for crimping Harting-type terminals. BZW-F4+G features insulation removal, twisting, threading, and crimping functions, significantly increasing production efficiency.
This machine is mainly applicable to new energy high-voltage lines, which can complete thefunctions of high-voltage wire stripping, aluminum foil removal, shield net cutting, and internainsulation stripping at the same time; each function can be used independently. Features of BZW-G5001S:- wire jacket stripping
- foil removing、
- shield net cutting
- peel off the internal insulation
- shield net flip
This machine is mainly applicable to new energy high-voltage lines, which can complete thefunctions of high-voltage wire stripping, aluminum foil removal, shield net cutting, and internainsulation stripping at the same time; each function can be used independently. BZW-G5001 features:- wire jacket stripping
- foil removing、
- shield net cutting
- peel off the internal insulation
- shield net flip
BZW-7D manual wire taping device. Handy and efficient.
BZW-2.5T-HSD is a device that simultaneously strips insulation from two wires and then crimps a terminal on them. All parameters of the machine are set using a large and clear touchscreen. Proper execution of the operation is ensured by an optical sensor that checks the position of the processed wires. The device is intended for processing HSD cables High Speed Data - cables most commonly used in automotive for fast transmission of data between, for example, a computer and modules such as a 360-degree camera, display, USB port, etc.
The presented set allows for cutting, stripping, and marking wires. A set consisting of:- automatic wire cutting and stripping machine BZW-882DJ
- wire printer ITS-PRV380P-W
Terminal crimping press with a power of 40 kN. Wire processing machines.Below is a video presenting the twin machine marked BZW-4040T.- 40 kN terminal crimping press. Cable processing machines.
BZW-PB - Wire feeder for wire on reel or wire on stretch foil designed to work with automatic terminal crimping machines or computer-controlled wire stripping machines.
- Cable Type - 0,3 - 6 mm² (AWG9 # - AWG23 #), other sizes on request,
- Features - wire cutting, wire stripping, half stripping, one and two-sided crimping,
- Dimensions - 3500 x 1200 x 1700mm,
- Weight -1100 kg.
- Wire range: 10-120 mm² (AWG6#-AWG0000#),
- Crimping force: 160 kN,
- Rated power: 7,5 kW,
- Average power:3,5 kW
- Power: 380 V / 50 Hz, three phase
- Dimension: 900 x 1000 x 2000 mm
- Weight: 900 kg
- Stroke: 40 mm (50 mm is optional)
- Cable Type - 28AWG ~ 18AWG for a single cable; 28AWG ~ 22AWG for a ribbon cable,
- Features - Unwinding of wires,
- Dimensions - 1200 x 700 x 1040mm,
- Weight - 120kg.
The BZW-886D machine is designed for stripping coaxial cables. The machine is characterized by high efficiency and a wide stripping range from 0.1 mm to 200 mm. Powered by 230V AC. The BZW-886D allows for stripping up to 9 layers. Stripping is performed using rotary blades which ensures very high precision and speed of operation.
BZW-3.0 C C PM 4M is upgrade of automatic high precise double ends terminal crimping machine. Mainly for power, automotive, new energy industry wire hamess preocessing. BZW-3.0 C C PM 4M can realize long wire cuttin, wire stripping, marking, waterproof seal inserting and double ends terminal crimping at the same time.
BZW-2.0X machine has the function of wire cutting, stripping and terminal crimping. PLC control system. Exquision appearance and compact structure, space saving and artistic appearance. Simple and quick replacement of the spare parts, full digital troubleshooting, and easy to maintenance.
This is a new mode cable processing machine controlled by micro computer, especially used for processing the wire harness in the industry of automobiles, power cable industry, electronic control cabinet ,charging point wire harness, charging gun wire harness, PV hard wire, BVR flexible wires. It can process coils of wire by setting its total length, head stripping and rear stripping as required, which greatly improves working efficiency. Automatic wire cutting, stripping on two ends, and multi-layers stripping at one time. Industrial level control chip and high precise servo driver, which ensure high speed and stable running for long lifetime. Motion controller, touching screen operation, up to 100 stripping archives can be stored. Automatic wire diameter adjustment, there is no need to change cutting tools for different cables. The cable of outer diameter under 14 mm can be easily processed, the strong driving force ensures the high working efficiency. The machine is multi-functional, there have been reserved some communication ports for connecting auxiliary devices. Auxiliary devices: automatic wire feeder, wire collecting device, mechanical arms, wire winding unit and so on.
Two wires can be processed at the same time, ensuring high work efficiency. Computer control, button operation, stable work performance, and easy operation. The feeding speed, cutting, and wire can be set separately to achieve the best processing effect. It has functions such as setting the total quantity, quantity of packages, time delay, middle skinning, etc. The motor controller uses a division method, with high precision and long service life. Up to 100 wire processing settings can be stored in the memory of BZW-882D2.
- Computerized control, touch screen, servo motor, more stable and easy to operate;
- High speed wire stripping, wire head, wire end and total length can be set randomly within the wire cutting range;
- The speed of wire feeding, wire cutting and stripping can be set independent, to reach the best effect of stripping;
- BZW-882DJ has the function of setting total quantity, bundle quantity, time postpone, middle stripping and etc;
- Motor drive using subdivision method, with high precision and long service life;
- 100kinds of different wire date can be stored in the system.
1. BZW-20TS Servo large terminal crimping machine can change different types of applicators according to different products.2. Advanced servo motor and PLC control system.3. Crimping force monitor is used to check if wire crimped qualified; crimping force exceed setting value, machine alarm and stop, and pop up crimping force anomaly window.4.High-tech industrial computer, PLC and crimping force system , data can be stored and checked.5.Data storage for different parameters, which allows continuous sequential crimping function.6. Stable working, large crimping force, overload protection.7. Applicators made of imported applicator steel, long durability.Note: user should upload data by themselves if connect with MES and server.
Cross section: 0,3 - 5 mm² (Other size can be special ordered) Cutting length: 60-10000mm (Other size can be special ordered) Cutting precision: ±(0.2%*L+1)mm Stripping length: 0,1 - 18 mm Feeding speed: Max. 8,0 m/s Wire collecting conveyor: 2 m, 4 m (Other size can be special ordered) Crimping force: 30 kN Power: 220V 50Hz Air supply: 0,5 MPa - 0,7 MPa, 8m³/h Weight: 1100kg Dimension: 3500 x 1200 x 1700 mm Detecting ability: wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and seal detecting. Applicator range: stroke is 30 and 40 mm .
- Wire range 0,3 - 6 mm² (AWG9#-AWG23#) (Other size can be special ordered）
- Cutting length 60 - 10000 mm (Other size can be special ordered）
- Cutting precision ±（0,2%*L+1）mm
- Stripping length 0,1 - 18 mm
- Feeding speed Max. 8,0 m/s
- Crimping force 30 kN
- Power 230V 50Hz
- Air supply 0,5 MPa - 0,7 MPa，8m³/h
- Weight about 1100kg
- Dimension 3500 x 1200 x 1700 mm
- Detecting ability wire knotting, wire lacking, terminal lacking, crimping pressure, air pressure, bare wire and terminal crimping lacking;
- Applicator range OTP applicator, European applicator and pneumatic applicator;
- It can be installed with CFM, monitoring the crimping quality during the whole processing and 100% traceability.
- Function - automatic wire cutting, wire single end striping and double end stripping/half stripping/ terminal crimping/seal threading, single end heat shrink tubing/jacketing inserting.
- Wire size: 0,1 - 2,5mm² (AWG12-36) (special size could be ordered)
- Pre-feeding device: servo motor (it is optional)
- Capacity: 4000 - 4200 pcs/hour (the length of each piece is less than 100mm)
- Function: double ends for wire striping and crimping, single end for semi stripping, single end for crimping.
- The adjusting method for blade: microprocessor controlled system + high precision stepping motor driving.
- Cutting length: 35 - 100000 mm (special length could be order)
- Cutting precision: adjusting range 0,5mm + cutting length * 0,5% below
- Stripping length: 1-10mm (special length could be ordered)
- Equipped die: OTP horizontal die, straight die, European style die, Korean die and etc.
- Crimping machine: frequency conversion mute crimping machine
- Control: PLC, touching screen.
- Inspecting items: inspection for wire tangle, defective wire, pre-feeding, wire crimping, and air pressure.
- Power supply: AC 230V/110V 50/60Hz
- Compressed air: 0,5 MPa about 140 N/min
- Outer dimension: 700 x 800 x1500 mm
- Weight: about 300kg
- Wire range 0,1 - 2,5 mm² (AWG23-AWG13) (Other size can be special ordered）
- Cutting length 35 mm~100000 mm (Other size can be special ordered）
- Cutting precision ±（0.2%*L+1）mm
- Stripping length 0,1 - 10 mm (Other size can be special ordered）
- Twisting length 4 - 10 mm (Other size can be special ordered）
- Feeding speed Max.6,0 m/s
- Capacity 4500 - 5000 pcs/h (within length 100mm)
- Crimping force 20 kN
- Voltage 230V 50Hz
- Motor 0,75 kW
- Air supply 0,5 MPa - 0,7 MPa，6m³/h
- Weight 200 kg
- Dimension 650 x 700 x 1500 mm
- Function - single end half stripping, single end crimping, single end twisting
- Detecting ability wire knotting, wire lacking, terminal lacking and air pressure detecting
- Applicator range Stroke 30 mm (40 mm stoke can be special ordered)
